Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Hello All lathe problem
-
28th May 2014, 10:30 AM #1New Member
- Join Date
- May 2014
- Location
- Australia
- Posts
- 4
Hello All lathe problem
Hello All i have just got my self an older type of lathe its my first wood working lathe and just woundering if any one knows much about it
its a Ryobi HL100 with the sanding disk at the back.
some info would be good because at the moment all it has is a face plate, i made up a jig so i can turn plates but i cant turn stuff like candle sticks and so forth.
Is there a chuck or something that i can get for it?
Thank you
-
28th May 2014 10:30 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
28th May 2014, 11:56 AM #2
G'day Sparky,
There are hundreds of requests for manuals etc on the internet as there are tens of thousands of these units about and clones are still sold today. You should be able to find a clone version of your lathe in many hardware stores or even Bunnings if you want to find or read the manual.
The lathe you have appears to have a 3/4" x 8 spindle thread. If you are real lucky it may have a morse taper 1 (MT1) hollow head stock spindle. The 3/4" x 8 chuck inserts are not very common but should be readily available for small scroll chucks or can be manufactured to order. http://vermec.tripod.com/PDFs/inserts_and_spanner.pdf
You could consider something like the Vermec Collett chuck on http://vermec.tripod.com/id1.html
Try http://www.toolspareparts.com.au/pag...00-Spare-Parts for their spur drive (parts 8 & 55) etc.
Be advised that the Ryobi HL100 and similar lathes (clones) are very lightly built for a wood lathe and that any planed turning projects should take that into account. Be safe.
-
28th May 2014, 12:39 PM #3New Member
- Join Date
- May 2014
- Location
- Australia
- Posts
- 4
Lathe Problem
Thank you for that, unfortunately it hasn't got a Morse fitting only the solid shaft.
But ill check out the web sites and let you know how i go
-
29th May 2014, 01:22 PM #4
A quick Google found this
http://www.toolspareparts.com.au/pag...00-Spare-Parts
Regards
John
Similar Threads
-
Lathe gears problem...
By surfdabbler in forum WOODTURNING - GENERALReplies: 9Last Post: 13th February 2014, 09:17 AM -
Problem with lathe oil pump
By GuzziJohn in forum METALWORK FORUMReplies: 6Last Post: 29th July 2013, 07:22 AM -
Lathe finish problem
By Andrew C in forum METALWORK FORUMReplies: 15Last Post: 2nd April 2013, 08:13 AM -
Problem with AL320G Lathe
By burraboy in forum METALWORK FORUMReplies: 8Last Post: 17th January 2013, 07:51 AM -
Problem with MC900 lathe
By Paulphot in forum WOODTURNING - GENERALReplies: 11Last Post: 24th February 2012, 10:45 PM