Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
-
28th October 2012, 08:01 PM #1
After Some Help Please re Delta Midi Lathe New Drive Belt
Hi I am hoping I may be able to get some help please.
I have a Delta Midi Lathe Model 46250 and my dilemma is that the belt is busted the Machine is about ten years old brought from Carba Tec unfortunately they do not stock Delta and for that matter I am not even sure if Delta is still a going concern any more.
I think I can get an aftermarket one from the States but postage is a bit prohibitive I am hoping there may be a company in Australia that I could get a belt from of the following size and type
V-Belt ¼ x 25-1/2 inches or 6.35mm x 64.77 Cm does anybody know of such a company that may have belts that size thanks in advance?
ColbraMay your saw stay sharp and your nails never bend
-
28th October 2012 08:01 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
28th October 2012, 10:00 PM #2
G'Day Col,
I think you are chasing a Gates Vee Belt #2L250, which seems to fit your sizes.
"Gates PT Catalogue: Industrial Power Transmission: Light Duty V-Belts: Truflex V<wbr>-Belts"
Maybe a local engineering supplier on the Central Coast or a good Bearing Supplier might help.
Cheers, Crowie
http://www.gates.com/catalogs/BELT%2...2012%20SM1.pdf
http://www.gates.com/catalogs/file_d...ocation_id=524
If you need I can ring an old suppier source in Sydney tomorrow for you about the belt availability?????
-
28th October 2012, 11:16 PM #3
Hi Pete
I will contact that Company tomorrow after I get back from the shed there may even be a place up here that I might be able to get it from
Thanks heaps for finding that for me. How's things in your camp.
ColMay your saw stay sharp and your nails never bend
Similar Threads
-
Reolace Drive Belt/ Ledacraft mini lathe.
By minus459 in forum WOODTURNING - PEN TURNINGReplies: 6Last Post: 13th October 2012, 03:19 PM -
Drive belt for Record lathe
By Chippy in forum WOODTURNING - GENERALReplies: 4Last Post: 10th December 2006, 10:38 PM -
Delta Midi Lathe
By colbra in forum WOODTURNING - GENERALReplies: 5Last Post: 10th July 2004, 12:11 AM -
Lathe drive-belt tension
By Rebus in forum WOODTURNING - GENERALReplies: 1Last Post: 27th January 2003, 06:46 PM