Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 9 of 9
Thread: Hoop Pine
-
20th September 2006, 10:03 PM #1
Hoop Pine
Someone down the road dropped a nice sized Hoop Pine (an Australian Pine), so me being me, hooked a chain around a fat 3 meter length, and towed it home behind the Hi-lux. Didn't do the road much good!!:eek:
Any experience or comments out there about it's suitability?? (for bowl or spindle work?) Or is it best relagated to the firewood heap?
Noticed I now chose my words VERY carefully! I didn't ask "how does ---- turn", because as a newcomber, I copped a lot of interesting replies, when I made that mistake!!
-
20th September 2006 10:03 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
20th September 2006, 10:36 PM #2
Slab it & stack it.
Not good for fire wood, 98.97% resin (I made that up but it is close).
By the time it dries, you may as well be chucking tissues in the fire.
It is better than radiata for furniture work.
I've heard that rocking horse makers use it.
I don't know the reason why.
Try the new party trick I told you about.
Look it up, find the techo name & then do a search on the techo name.Cliff.
If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.
-
20th September 2006, 10:55 PM #3
I have an old sewing machine stand that has been made into a small table with a Hoop pine top. Looks pretty enough but I don't know how it would work.
Terry B
Armidale
The most ineffective workers will be systematically moved to the place where they can do the least damage - management.
--The Dilbert Principle
-
20th September 2006, 11:03 PM #4
hoop is a lot more respectable than pinus crapiata.
stronger smother grain.....
exador dragged a cuple of big bits back to the yard & milled it up happily.
cheersAny thing with sharp teeth eats meat.
Most powertools have sharp teeth.
People are made of meat.
Abrasives can be just as dangerous as a blade.....and 10 times more painfull.
-
20th September 2006, 11:15 PM #5
Hoop pine (Araucaria cunninghamii), widely used in days gone by for VJ sheeting, jamb linings, mouldings etc. Used plenty of it in the trade. Maybe Cliff is thinking of Caribea pine, which is quite resinous, gums up saws, and all sorts of machines. Hoop pine is a nice timber, very plain grain, and is ideal for making functional turnery, eg salad bowls, table legs, tables and chairs. Good for spindle turning too. In fact it was used for sink bench tops, when the sink was an enameled steel bowl fitted under the top, before the advent of stainless steel sinks and laminex.
JimSometimes in the daily challenges that life gives us, we miss what is really important...
-
20th September 2006, 11:27 PM #6
-
21st September 2006, 07:08 AM #7Hewer of wood
- Join Date
- Jan 2002
- Location
- Melbourne, Aus.
- Age
- 71
- Posts
- 12,746
Did a bowl out of a piece years ago; from memory, even grain, little figure (except for a bit of bluestain), easy turning.
If it's susceptible to bluestain then block some down and seal asap.Cheers, Ern
-
21st September 2006, 09:47 AM #8
I've turned a bit of it and it's pretty good as far as pines go. Quite like it actually BUT!!!! make sure you get the bark off quick smart or it will blue for sure (DAMHIKT). ..... Here's one I prepared earlier...
-
21st September 2006, 04:59 PM #9
Similar Threads
-
Supply of Hoop Pine
By Bob Whitworth in forum TIMBERReplies: 14Last Post: 15th February 2009, 11:57 AM -
hoop pine
By Tonyz in forum TIMBERReplies: 5Last Post: 19th September 2006, 09:44 AM -
Old hoop pine finish
By Jane in forum FINISHINGReplies: 14Last Post: 25th August 2004, 11:24 PM -
Photos of Rustic Furniture, Hoop Pine Branches
By Bob Whitworth in forum WOODWORK - GENERALReplies: 0Last Post: 11th March 2002, 07:24 PM