Needs Pictures: 0
Results 1 to 2 of 2
Thread: Huon Pine Turned Box
-
4th November 2021, 11:24 PM #1
Huon Pine Turned Box
I had a go at a turned box with a slip fit lid using some 100 x 100 Huon Pine .
A birthday present for My youngest 21 year old daughter. If it made it to the finishing stage off the lathe.
It was a first for me and a first using some scrapers that had to be made or bought .
I made them and I had a few catches with them . I was warned so was being as careful as I could.
I added some negative rake and that mostly sorted the catches out .
The inside was finished with a rub and friction shine while on the lathe with some solid wax . A mix of Beeswax and Carnauba . The outside was given a wipe with sanding sealer while on the lathe . Then given a little shellac later . A polishing rubber with a dab of oil . That was then rubbed back later with 0000 steel wool and given a beeswax buff .
Here's some pictures.
IMG_9435.jpg IMG_9437.jpg IMG_9438.jpg
IMG_9441.jpg
IMG_9464.jpg IMG_9466.jpg
Rob
-
4th November 2021 11:24 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
5th November 2021, 05:51 AM #2
That’s very ornate, with an almost bell like profile. Lovely.
I love turning Huon Pine. Apart from the smell, it works like butter.
Similar Threads
-
S.A.Swap Huon Pine
By vin in forum TIMBER SWAPReplies: 1Last Post: 7th April 2017, 11:34 PM -
Huon Pine box.
By goodwoody in forum WOODWORK PICSReplies: 9Last Post: 7th June 2013, 12:09 PM -
turned and carved huon bowl
By driftit in forum WOODTURNING - GENERALReplies: 11Last Post: 10th January 2011, 11:09 AM -
Huon PIne
By raltenhofen in forum WOODTURNING - GENERALReplies: 11Last Post: 9th January 2004, 09:11 AM