Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 10 of 10
Thread: Ideas For Supplied Air Masks
-
2nd March 2014, 12:58 PM #1GOLD MEMBER
- Join Date
- Sep 2008
- Location
- North Carolina, USA
- Posts
- 2,327
Ideas For Supplied Air Masks
So much timber, so little time.
Paul
-
2nd March 2014 12:58 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
2nd March 2014, 01:10 PM #2
Respirator
I have made something similar which works well thus far
It is a chemical hood with a protective facemask, coupled to an evaporative Air Conditioner via 2 lengths of pool hose. Work well, but I do need to get mine into fresh air, that will be Mk II.
On a side note, but related, you are so lucky being in the States with a huge array of choices, we get nothing here in Australia. I lived in Chicago in 2000, prior to becoming a serious wood turner. Knowing what I know now, I would have bought and brought back tons of stuff. Was on ships for a while, and only brought back household items, oh well, sigh.
Of course, freight kills us as well.
Willy
JArrahland
-
2nd March 2014, 02:57 PM #3.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,807
As far as wood turners are concerned I'd be putting that sort of money towards a decent dust extractor.
Not only would it protect the turner but it would keep the workshop a hell of a lot cleaner and fire safe at the same time and stop the turner transferring wood dust to everywhere else in their house.
OHS protocols stipulate that engineering solutions should be considered before any PPE protection, which is why a dust extractor just makes all round better H&S sense than a mask or hood.
PPE can be used on top of engineering solutions for additional safety but should not be used to avoid engineering solutions.
-
21st October 2016, 01:34 AM #4Senior Member
- Join Date
- Jul 2016
- Location
- Brisbane
- Age
- 45
- Posts
- 101
+1 for what BobL said.
If you are in the workshop, a dust extractor is much better than relying on PPE.
I'm still working through a DIY solution for some spray work (iso) and welding fumes in an area that I can't effectively evacuate with an extractor, but to be honest it is a PITA and I'm only doing it because there are no other good options.
If you are going to make a supplied air mask for use with dusty environments, make sure that you don't get drumming in the cavity that contains the clean air when you move. This can cause dust to get sucked in when you move. The worst types of wood dust contain fungi or bacteria that lodge in your lungs and make your life shorter. And, with this type of dust it doesn't matter how much you breath in - its all bad.
There are a number of other design criteria to be aware of (how to avoid things that kill you) and you should try and find some of the testing protocols used to ensure that the masks achieve the desired results. With that said, if you can get a supply of clean air to your mask at 1-2 bar of pressure and at a good flow rate (which will depend on your setup), then this will generally be better than using a face mask with filters on it. This is because you don't have to rely on the seal integrity of the mask.
-
21st October 2016, 10:17 AM #5.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,807
1-2 Bar = ~15 to 30 psi.
I think you mean this pressure to be that of the air supply? but my concern would be if someone was to try and make a sealed mask to maintain a 1 - 2 bar pressure differential.
Given that most ear drums rupture at about 5 psi that will be your first indication something is wrong
Secondly, Rats ventilated with peak inspiratory pressures of 30 cm H2O (0.5 psi) developed a pulmonary edema within 60 min.
The misuse of ventilators even in the <1 psi range in hospitals has done similar things.
This why pressurised mask development is best left to professionals.
-
21st October 2016, 03:59 PM #6GOLD MEMBER
- Join Date
- Jun 2006
- Location
- Burwood NSW
- Age
- 82
- Posts
- 1,247
Have a Look at my posting "DIY PP respirator" 14/6/12.I don't know how to do the link thing ,or google it and you should find it.
Ted
-
21st October 2016, 04:19 PM #7Deceased
- Join Date
- Jun 2003
- Location
- ...
- Posts
- 7,955
Here is the link.
Peter.
-
24th October 2016, 09:52 AM #8Senior Member
- Join Date
- Jul 2016
- Location
- Brisbane
- Age
- 45
- Posts
- 101
-
24th October 2016, 10:13 AM #9.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,807
I would not advise using any sort of pressurised mask. Even though it would be quite difficult to maintain much of a pressure differential around a face mask the pressures needed for lung damage are quite low. A friend of mine who was having breathing issues from pneumonia was put on a conventional oxygen mask in hospital and someone turned the pressure up just a touch over the recommended value and his lungs started bleeding.
Its far safer to forget about any sort of pressurisation and work with an unsealed mask or hood that generates excess flow. 300 L/min sound cover most situations.
-
24th October 2016, 02:09 PM #10Senior Member
- Join Date
- Jul 2016
- Location
- Brisbane
- Age
- 45
- Posts
- 101
Agreed.
In addition to your point above, the systems that work off filtered compressed (dried) air, also cause nose bleeds and other problems because there is little to no moisture in the air. You have to consider every aspect of the design so you don't cause yourself harm.
Similar Threads
-
Masks
By Lietuvis in forum WOODCARVING AND SCULPTUREReplies: 10Last Post: 19th September 2011, 04:30 AM -
Wanted: Creative pieces for community exhibition - free wood supplied
By PaulM in forum WOODTURNING - GENERALReplies: 6Last Post: 3rd July 2009, 12:40 PM -
Wanted: Creative Pieces for community exhibition - wood supplied
By PaulM in forum WOODTURNING - ORNAMENTAL TURNINGReplies: 1Last Post: 30th June 2009, 09:31 AM -
Wanted: Creative Pieces for Community Exhibition - Free Wood Supplied
By PaulM in forum WOODCARVING AND SCULPTUREReplies: 0Last Post: 29th June 2009, 08:47 PM -
Grinding with wider wheels than supplied
By BoomerangInfo in forum GENERAL & SMALL MACHINERYReplies: 13Last Post: 1st November 2008, 04:18 PM