Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 13 of 13
Thread: Identical Twins
-
12th July 2013, 10:38 AM #1
Identical Twins
I recently built two beds, with Radiata Pine, with lots of scrap pieces left I built these two Amphora, I did It more or less as an exercise in precision, as most of you know Pine is not very friendly to turn as the fiber lifts very easy, so for the final passes I applied sanding sealer to the wood and it did the Job.
if you look closely you'll see that all the rings are at the same level , and this was realized checking the height of each ring, before and after glueing , wall thickness 4mm, dimessione 280x95mm
Finishing EEE-Ultrashine and Shellawax.
Cheers Tony.
P6270018.jpg
P6270020.jpg
P6270024.jpg
-
12th July 2013 10:38 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
12th July 2013, 11:01 AM #2
Beautiful work.
Make another 8 and you can do ten pin bowlingVisit my website at www.myFineWoodWork.com
-
12th July 2013, 06:20 PM #3
-
12th July 2013, 08:44 PM #4
Stunning work and a good shape, especially for a pair of that size.
Dragonfly
No-one suspects the dragonfly!
-
12th July 2013, 09:44 PM #5
-
15th July 2013, 08:29 AM #6
-
15th July 2013, 08:42 AM #7
-
15th July 2013, 02:03 PM #8
Great work Tony, I like em a lot
-
15th July 2013, 06:09 PM #9
-
15th July 2013, 08:00 PM #10
hi tony,
well done mate they look great
cheers smiife
-
15th July 2013, 08:27 PM #11
-
15th July 2013, 08:52 PM #12
Well done Tony I like the finish. I'm also pleased they decide to leave segmenting on this page as I would not have seen these 2 nice pieces of work.
But some people have to much free time on their hands
RippaThee who has not made a mistake, has not made anything ??
-
15th July 2013, 09:16 PM #13
Similar Threads
-
Twins
By minus459 in forum WOODTURNING - PEN TURNINGReplies: 5Last Post: 8th May 2013, 11:07 PM -
Twins
By bdar in forum WOODTURNING - PEN TURNINGReplies: 3Last Post: 26th April 2012, 08:12 AM -
Badge engineering - Rebadging identical machines
By boban in forum HAND TOOLS - POWEREDReplies: 53Last Post: 18th January 2008, 02:44 AM -
Twins
By Richard Casey in forum WOODIES JOKESReplies: 0Last Post: 29th December 2001, 08:19 PM