Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
Thread: How do you use the indexing jig?
-
21st May 2015, 08:43 PM #1SENIOR MEMBER
- Join Date
- Jul 2010
- Location
- Canberra
- Posts
- 566
How do you use the indexing jig?
I've finally got the cash together to buy a new check for my lathe, and it has indexing marks behind the chuck.
How are these supposed to be used?
Thanks,
Craig
-
21st May 2015 08:43 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
21st May 2015, 11:27 PM #2
I know you said you have a chuck with indexing this is a face plate or index plate which shows how the indexing is located. What you need is the bracket and leaver and pin to suit see this link
-
22nd May 2015, 03:05 PM #3
Indexing Jig
Make one of these: https://www.woodworkforums.com/f8/index-jig-mc900-87645
Of course truth is stranger than fiction.
Fiction has to make sense. - Mark Twain
-
22nd May 2015, 11:04 PM #4SENIOR MEMBER
- Join Date
- Jul 2010
- Location
- Canberra
- Posts
- 566
Thanks!
Thanks for posting the suggestions. I like the bracket solution as I can pick up something fairly strong to do the trick and at a decent price. Not sure of the second option would work for me, but have to admire the clever design
Craig
-
23rd May 2015, 08:00 AM #5
You could go up market with http://www.vermec.com/vermec-lathe-accessories.html
Mobyturns
In An Instant Your Life CanChange Forever
-
29th May 2015, 06:54 AM #6SENIOR MEMBER
- Join Date
- Jul 2010
- Location
- Canberra
- Posts
- 566
Whoa!
Not wrong about it being upmarket!
Nice stuff there 😀
-
29th May 2015, 09:16 AM #7
-
5th June 2015, 08:46 PM #8SENIOR MEMBER
- Join Date
- Jul 2010
- Location
- Canberra
- Posts
- 566
Chuck
I picked up a GPW deluxe set, which is a huge improvement over the original Carbatec 80's era finger mincer that my lathe came with.
Similar Threads
-
Indexing feature
By Boris L in forum WOODTURNING - GENERALReplies: 11Last Post: 6th September 2010, 03:52 PM -
Indexing the tailstock on a 260
By jackafrica in forum THE HERCUS AREAReplies: 0Last Post: 13th October 2009, 07:25 PM -
indexing jig for woodfast 280
By macca2 in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 1Last Post: 2nd January 2008, 07:32 PM -
Indexing
By macca2 in forum WOODTURNING - GENERALReplies: 6Last Post: 1st April 2005, 10:34 AM -
Woodlathe Indexing
By graemecarson in forum WOODTURNING - GENERALReplies: 4Last Post: 22nd February 2005, 11:00 PM