Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 32
Thread: My Lathe!
-
19th July 2006, 05:36 PM #1
My Lathe!
G'day,
'Tis a happy moment in the Waldo shed as my lathe has made it's way to it's final resting place.
The lathe is a Tough lathe that started its life over in Perth and while on holiday over there my late Grandad saw it and offered to buy it and shipped in back to Brisbane on the Indian Pacific.
While a young bloke my Grandad taught me a few things on it, then he died and my Dad inherited it, sadly after a year of it living in his shed he too died and never got the time to switch it on. Now four years later and after living in my FILs shed it has made it's way home to my shed!
A local forum member around the corner from me graciously loaned me one of his lathes and now that it's gone back to him my lathe can take it's place. I am now very happy to have another of my Grandad's pieces of machinery in my shed, where it will be loved and will live happily ever after.
So it's made the trip from the west to the east and all the way down the east coast and it's not going anywhere else, until the day I die.
Pics below are of the lathe, assorted chisels and chucks.
-
19th July 2006 05:36 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
19th July 2006, 05:54 PM #2
Cool, does it have a brand?
That is one MOTHER of a chuck, what is the thread?
Can you get modern chucks to fit?
There is some good steel in the tool collection, I can see some sorbys & at least one Henry Taylor (bottom row, left side)
If you get a couple of cheap spanners from Bunnies or Supercheap with a ring in one end that fit the bolts on the tails stock & the tool rest (banjo) & hot melt glue them onto the nut in a position that is out of the way when the nut is tight, they are just as good as a cam lock. Grind the other end off the spanner & round it over.Cliff.
If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.
-
19th July 2006, 06:02 PM #3
Nice pics Waldo
Hopefully you as well can pass the lathe on to family members
(when the time comes)
A great selection of chisels as well
If you find you have to many.....ship some this way100% of all non-smokers die
-
19th July 2006, 06:05 PM #4
G'day Cliff,
The brand of the lathe is "Tough", from what I understand started out in Perth where they were built the bloke who owned the business went bust and it was sold to a firm in Melbourne, who in turn also went bust.
The scroll chuck sitting on the floor, I've got no idea what size thread it is but I know it's heavy.
The lathe takes #2 tapers, so I can get new chucks to fit, however if I break any bits off the lathe I can't get replacements.
Yeah, there's some nice chisels in there - you've spotted the Henry Taylor, others include some Marples and some home made chisels my Grandad made from HSS files. Now I just have to sharpen them - Skew!
Thanks for the idea about the ring spanners.
-
19th July 2006, 06:33 PM #5Originally Posted by WaldoCliff.
If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.
-
19th July 2006, 06:36 PM #6
that sir... is a very sexy lathe!
can a lathe be sexy?... I noticed an old "tough" (not as old as yours tho) while drooling over machinery in preston last week.. if its anything like the one I left my greasy fingerprints on you have yourself one very nice lathe.
and from your grand dad too... dare I say.. sexy, with sentimentality :P
well done mate, that machine should outlive a few generations yet I'd say.
-
19th July 2006, 06:49 PM #7
Drool.....................................................................
You are a lucky guy and you know it.
Best of luck - the best tools are the ones that you inherit (at least that's what I tell my son)Cheers
Jeremy
If it were done when 'tis done, then 'twere well it were done quickly
-
19th July 2006, 06:53 PM #8
Do I sense a sharpening day taking place down here?
I've also a few asstd. chuck inserts lying around here that you can try for a fit. It's usually easier to simply measure & count, though... don't forget to use an imperial ruler! Somehow I seriously doubt it has metric thread.
- Andy Mc
-
19th July 2006, 08:32 PM #9Originally Posted by Cliff Rogers
Yep, aware of that, I must've misunderstood your question. Like Skew said, I need to use some sort of archaic ruler with 1/16ths on it or something. It may be that I'll need to get inserts to fit any new chucks to suit the thread - but that's something I'll find out.
Yep Slow6, it's sexy in a cold nice machinery way, but I'm not about to do a Al and his goats job with it.
I'll be knocking on your door sometime Skew, as I'll need some tuition in sharpening lathe chisels, some are straight forward others not so and I don't want to stuff them up. Some have had a sharpen and haven't turned out too symetrical and need life breathed back into them.
So many things to do and not enough hours for it all. Have to get back to work for a few more hours yet.
-
19th July 2006, 09:49 PM #10Originally Posted by Waldo
When the WA mob went broke Len Smith from the Woodsmith in Victoria purchased the rights to the lathe he can be found at http://www.thewoodsmith.com.au/thewoodsmith/ I know that he was making the lathes and he also offered a repair/renovation and parts service.
Enjoy your lathe.
PhilTwo things are infinite: the universe and human stupidity; and I´m not so sure about the universe.
-
19th July 2006, 09:51 PM #11Originally Posted by Cliff RogersTwo things are infinite: the universe and human stupidity; and I´m not so sure about the universe.
-
20th July 2006, 01:31 AM #12
Thanks Phil
G'day Phil,
Thanks for the info on Len Smith, who's just around the corner from me. You posted the same info in a PM, but I wanted to make my gratiude made public to you.
-
20th July 2006, 01:34 AM #13
three jaw chuck
Waldo,
By the look of it the big scroll chuck is a 6" chuck from a metal turning lathe.
It should have depending on its age either a threaded hole around 1 1/2" or a cam lock system of 4 or 5 dowels. Has it got a name plate? This will help with the threaded hole dimensions etc.
The dowels should attached to a removable plate, once the plate is off you can fit a face plate to it. By match drilling off the dowel plate.
I am in the process of the same to an old 6" chuck myself, just gotta pick the face plate and drill it out.
hughieInspiration exists, but it has to find you working. — Pablo Picasso
-
20th July 2006, 03:04 AM #14
You bust be very young if that lathe was owned by your grand dad. Look at mine (I used it as avatar)… it tells you how old I am… (hum... I must say he got it from his father)<O</O
You have all was is needed to do outstanding turning, (including a three points steady). As the other told you, if you had to spend a little money I’d go for a modern chuck. Old ones, like yours, are sure heavy, but they didn’t keep the wood safely on the lathe.<O</O
I’m surprised to see how rusty can be HSS… Are you sure they are?
In any case all your gouges are more than you will ever require, plus the self made one indicate me that your Grand Dad was really a passionate woodturner….
Keep and transmit the family tradition <O</Ohttp://www.la-truciolara.com/
La Truciolara is the workshop where I do my shavings.
-
20th July 2006, 09:13 AM #15Originally Posted by Waldo
Regards
PhilTwo things are infinite: the universe and human stupidity; and I´m not so sure about the universe.
Similar Threads
-
GMC Wood lathe
By smidsy in forum WOODTURNING - GENERALReplies: 36Last Post: 28th September 2008, 02:10 PM -
Choosing a lathe?
By cedar n silky in forum WOODTURNING - GENERALReplies: 11Last Post: 25th July 2006, 08:37 AM -
buying New lathe
By Tassie Boy in forum WOODTURNING - GENERALReplies: 10Last Post: 11th June 2006, 01:54 AM -
Lathe Stand -- Building
By Simmering in forum WOODTURNING - GENERALReplies: 11Last Post: 17th January 2005, 02:52 AM -
Delta 14" lathe.
By leighd in forum WOODTURNING - GENERALReplies: 3Last Post: 31st July 2004, 07:58 PM