Originally Posted by
wheelinround
I'd be interested to know what type, brand of paint. ? Why you chose a flat not high gloss?
I was thinking that high gloss would reflect light and might make it hard to concentrate on the work in progress. By all the finishes that I have seen for lathes I do not recall any having a high gloss finish. I know that some had a rough texture but not high gloss.
The brand of paint is White Knight.
Just note Christos what was the temp advisor on the can usually lowest is about 10-15C.
The temperature on the can says to use when above 10 degrees. Some early mornings that I got up early I went to the garage to take a look and found that the temperature was below 10 degrees. I waiting for a little while by doing other things and once it was warm enough I got to painting.
One thing that I do not mind doing and that is painting. I have always found it relaxing.