Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 15
Thread: Left- Handed...A Handicap?
-
26th May 2015, 08:16 AM #1SENIOR MEMBER
- Join Date
- Feb 2015
- Location
- Hobart
- Age
- 77
- Posts
- 649
Left- Handed...A Handicap?
I am thinking about purchasing a small lathe to turn handles. As a left-hander, what should I be aware of in terms of choice of lathe, tools & practice?
yvan
-
26th May 2015 08:16 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
26th May 2015, 09:41 AM #2
Left handers make the best turners Normal lathes are fine
Neil____________________________________________Every day presents an opportunity to learn something new
-
26th May 2015, 10:19 AM #3
It has been said that the origination of the lathe might have been originally built for left handed. Of course this might be a total myth as I certainly can not locate any substantiation for that statement.
As I am right handed there have been some times that I found would be better if I was left handed. As an example when using the skew chisel in a planning cut from left to right. Then you could argue that I could do a planning cut from right to left.
If you are only going to be turning handles meaning between centers you will be facing the lathe at 90 degrees to the work. So I don't think it matters which hand is predominant.
If you decide to make a bowl and when hollowing might need to stand at the end or towards the end of the lathe to allow the left hand to be dominant.
-
26th May 2015, 11:42 AM #4Senior Member
- Join Date
- Mar 2012
- Location
- sydney
- Posts
- 156
left handed
Hi
I'm lefthanded and found that sometimes it is a advance. have learned to do turning both ways and using whatever style;
Bowl turning right handed is best, but if you have a swivel head it makes no difference. I'm using a normal lathe.
Cheers
-
26th May 2015, 12:27 PM #5GOLD MEMBER
- Join Date
- Jan 2010
- Location
- Melbourne
- Posts
- 2,636
I don't think it really matters, left or right. The best thing to do is make sure you don't place your lathe against a wall or anything. Your lathe can then be accessed both sides making the left/right hand issue redundant (that's if you have a reverse option).
-Scott
-
26th May 2015, 05:52 PM #6GOLD MEMBER
- Join Date
- Jun 2010
- Location
- shoalhaven n.s.w
- Posts
- 1,240
One of my tafe teachers declared that there is no left handed wood turners. And they would be shown how to turn right handed.
But we never got to test him on it as we had no left handers in our class.
I can't see it being a problem. Most on off switches are on the left.Turning round since 1992
-
26th May 2015, 06:03 PM #7
I reckon it would be an advantage - the lathe legs wouldn't get in the way as the turner would be standing further to the right
regards
Nick
veni, vidi, tornavi
Without wood it's just ...
-
26th May 2015, 06:43 PM #8China
- Join Date
- Dec 2005
- Location
- South Australia
- Posts
- 4,475
Should not be a problem nothing special for left handers, I taught my late sister to woodturning many years ago she was left handed,
if anything she found it easier than I do
-
26th May 2015, 07:51 PM #9Retired
- Join Date
- May 2012
- Location
- Canberra
- Posts
- 1,820
Im a true ambidextrous, but I find myself using the left all the time for all sorts of things. For the lathe I use it left handed.
Its one of the few tools that actually feels correct to use as a leftie... so rather than a disadvantage, I think it's right (oh, the pun!).
One of the things I found a bit weird was I "sort of" taught myself to use the skew. I was switching hands dependant on where I was on the work. As I was getting serious, I had an experienced turner come to teach me a few lessons and they were pretty amused at my swapping around without body movement. It sure does help for bowls, we can do the sweeps and insides better, I feel... lefties overcome inherent right-handed-only design flaws daily so we do learn to switch more.... righties do not, so we have that advantage over them.
Other than these points, its all practice, practice, practice!
-
26th May 2015, 08:52 PM #10
Yes for the Lefties.
Hi All,
Yes, I have always been told, the Lathe was made by a Left Hander, for the Left Hander.
If I have to do a Bowl, well, then I can go Right Handed.
Further to that I belong to " The Left Handers Club " UK based. Quite interesting at times.Regards,
issatree.
Have Lathe, Wood Travel.
-
26th May 2015, 08:53 PM #11GOLD MEMBER
- Join Date
- May 2011
- Location
- Murray Bridge SA
- Posts
- 3,339
Basically it's a matter of training the brain to change. It took quite a while for me to learn to turn left handed, especially the skew. Enjoy!!!!!
I watched a program on the idiot box, where someone modified a push bike to steer the opposite way, by use of a gear in the steering. It took him eight months to learn to ride it, his 8 YO son, 3 weeks, but, when he went back to a normal bike, he couldn't ride it, he kept falling off.
Kryn
-
26th May 2015, 08:57 PM #12SENIOR MEMBER
- Join Date
- Sep 2011
- Location
- Hervey Bay
- Posts
- 250
Hi yvan,
I haven't any comment to add with regard to turning, but did you know that
everyone is born right handed, and only the best of us overcome that.
Cheers, Jeff
-
26th May 2015, 10:33 PM #13
Well for I dont it as any sort of problem at all. I turn with both hands as it suits the job at hand.
Inspiration exists, but it has to find you working. — Pablo Picasso
-
27th May 2015, 02:59 AM #14GOLD MEMBER
- Join Date
- Sep 2008
- Location
- North Carolina, USA
- Posts
- 2,327
I am right handed. Over time I have trained myself to use a hammer and other tools using the left hand. Not as well, but doable.
When I started turning I made a strong effort to turn left handed as well as right handed.
I can now swap back and forth going from inside the bowl to the outside, or using a skew without even thinking about it.So much timber, so little time.
Paul
-
27th May 2015, 10:56 AM #15SENIOR MEMBER
- Join Date
- Aug 2008
- Location
- Normanhurst NSW 2076
- Age
- 81
- Posts
- 484
Left handers.
Well as a left hander, I can say that if you are buying a lathe, ensure you buy a swivel head.
It will make things easier for you. Generally, however, I don't find it a problem and I don't have a swivel head. Of course,
if you have the room in the Shed, you can stand on the right hand side and cut in the normal way
for bowl work, i.e you are still cutting from the left side of the piece. On the other hand if you
are doing only spindle work and you are facing the lathe, it would make no difference. However,
many of the smaller lathes (minis) are not swivel head. As I always say, you can do
small things on a full sized lathe, but you cant do large things on a small lathe. Personally, I
would go with a midi lathe and swivel head, but you should get some practical advice, including standing
in front of a lathe and seeing how comfortable you feel. Try before you buy. Hope that helps. Drillit.
Similar Threads
-
How left or right handed are you?
By artme in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 17Last Post: 9th November 2012, 07:37 PM -
Do I need a Left Handed Bench?
By finchy in forum THE WORK BENCHReplies: 20Last Post: 30th June 2012, 10:42 PM -
Left or Right handed?
By kamusur in forum HAND TOOLS - UNPOWEREDReplies: 9Last Post: 24th May 2012, 10:15 PM -
Are You a Left Handed or Right Handed Shooter?
By Les in Red Deer in forum WOODTURNING - PEN TURNINGReplies: 3Last Post: 23rd January 2012, 07:54 AM -
Are you Left or Right Handed?
By Tankstand in forum POLLSReplies: 39Last Post: 4th June 2005, 08:16 PM