Thread: Small lidded box/vessel - my first attempt

you have been busy hermit! I really like your shapes!

You've done a great job. Nice, simple design with the join concealed well. I like the use of the contrasting timber and finished beautifully. Well done.

Steve that is a great little box!! I like the contrasting timbers in the lid. Nice touch!!!

Some nice looking exercises there. I take it in turner lingo the U in UFO stands for unintentional and not unidentified, or maybe uncontrolled.

Regards

Thanks for the kind comments guys. The little box was fun to make, and good practice. Even managed an air-tight fit with the lid - pops when I open it.
I can see the faults, though, so I'll see if I can do better on the next one. About half-way through, I started getting ideas to improve it, but it was too late to implement them.

Originally Posted by A Duke

I take it in turner lingo the U in UFO stands for unintentional and not unidentified, or maybe uncontrolled.

I was thinking 'unwanted', but like 'unintentional' much better, so I'll go with that. Thanks.

I like it, well done for your first attempt. Much better then my first attempts at box making.

A timely post as I have got the book by Chris Stott on turned boxes for my birthday and have started to make them (in between all the other things I want to turn) in order to hone my box making skills.

Peter.

Steve
A good effort . One point to watch,boxes are usually made from end grain because it is more stable and is less
likely to move,you may find that your lid that now 'pops' may jamb on after a while.
Ted

Originally Posted by turnerted

Steve
A good effort . One point to watch,boxes are usually made from end grain because it is more stable and is less
likely to move,you may find that your lid that now 'pops' may jamb on after a while.
Ted

Yeah, Ted, I was actually expecting it to start moving before now, with the humid weather over the last few days. I'm almost right out of timber, so resorted to cross-grain for these just because that 45mm Merbau is sitting here. A bit more practice at faceplate turning, too.

These first two are just for my own collection and won't be passed on, so I can see how they go. I was thinking that possibly both halves would go out-of-round by a similar amount, so that the lid would still fit as long as the grain was aligned.

I don't know what I'll do about a timber supply, (hardwoods). I can't keep buying small blanks online. The price with postage is killing me. If I want to keep at it daily, it could cost $20 to $40 a day.

Originally Posted by sturdee

A timely post as I have got the book by Chris Stott on turned boxes for my birthday and have started to make them ( in between all the other things I want to turn) in order to hone my box making skills.

I just had a look at a bit of Chris Stott's stuff. I think I might have to get myself a copy of that book, Peter. Is it "Turned Boxes - 50 Designs"?

Originally Posted by Hermit

I just had a look at a bit of Chris Stott's stuff. I think I might have to get myself a copy of that book, Peter. Is it "Turned Boxes - 50 Designs"?

Yes it is and in addition to the 50 designs for copying there are also quite a few photos of boxes made by other turners to inspire you. All the boxes are small and a quick look through shows the diam of the larger boxes to be about 100 mm. I have a pile of fence posts off cuts of cypres pine that I'm going to use for them so practicing making the boxes would not be as expensive as you think.

I'll start a new thread later (when the camera battery is charged again) showing my box making journey.


Peter.

Originally Posted by Sturdee

Yes it is and in addition to the 50 designs for copying there are also quite a few photos of boxes made by other turners to inspire you. All the boxes are small and a quick look through shows the diam of the larger boxes to be about 100 mm.

Sounds good. It's on my shopping list.
I spotted this page, too, while looking for Chris Stott stuff. Thought it might interest you. More food for thought: Woodturning Reference and Information Magazine Online

I have a pile of fence posts off cuts of cypres pine that I'm going to use for them so practicing making the boxes would not be as expensive as your think.

I'm transport-challenged, (pushbike), so can't carry much. That's why I usually buy online for other (non-turning) projects. Woodturning really eats the wood, though, so I'll have to sort something out.
Meantime, I got a nice piece of NSW Scented Rosewood by mail from the Woodsmith today, 90mm square x 130mm long. That'll be my next box attempt.

NSW Scented Rosewood 95 x 90 x 130 long.JPG

I'll start a new thread later ( when the camera battery is charged again) showing my box making journey.

Looking forward to it.

Steve why don,'t you have a word with Mapleman I am sure you could work out a good deal on some timber.
Cheers Frank.

Originally Posted by elderly

Steve why don,'t you have a word with Mapleman I am sure you could work out a good deal on some timber.
Cheers Frank.

Good idea, Frank. I think I'll save my bikkies for a bit, then see what Chris can do for me. I've got a nice piece of QLD Maple for a CBG guitar soundboard already that I got from him a while ago. Nice timber. The only downside is postage.
All that's readily available here are some old pallets 'round the corner. And a dead branch hanging off a gum tree (in the park) down the road, but I don't have a chainsaw.
Perhaps I should buy a small chainsaw and sneak out at nights....

I've got heaps of box-sized timbers that I can eventually use for segmented turning, but that's still a fair way off, when I have a better idea of what I'm doing.

Are there any other members on here from your area. Maybe an ad in the Market Place in the Wanted section might save you a few dollars. Most people seem to have more wood than they will ever use. I know I do.

Forgot to say, nice work on the lidded box. The inlayed piece in the lid is fitted very nicely.

Originally Posted by Treecycle

Are there any other members on here from your area. Maybe an ad in the Market Place in the Wanted section might save you a few dollars. Most people seem to have more wood than they will ever use. I know I do.

Forgot to say, nice work on the lidded box. The inlayed piece in the lid is fitted very nicely.

There are a couple of other members in the area, but they don't have an excess of timber. I've decided to sit on my hands for a bit - finish off what I have here, take some time off while I save and buy the rest of the tools I need, then I can worry about $$$ for timber. I'll get there, just have to pe patient for a few months.