Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 10 of 10
Thread: What a load of Bull
-
14th July 2013, 05:03 PM #1
What a load of Bull
Good Afternoon Ladies and Gentlemen
Was asked to mount these Buffalo horns. I turned a Jarrah Burl mounting board to suit. The hardest part of this was sourcing suitable cow hide (black), but none could be found so I settled for the brown/white combo. I then turned a joiner to insert into the open ends of the horns and glued and screwed them in place. Then was able to attach the mounting board to the joiner with big screws. I hope the customer will be happy.
Sincerely
Willy
Jarrahland
Note: It is quite cold here in Perth at the moment so instead of my safety crocs, I have opted to wear my safety moccasins
-
14th July 2013 05:03 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
14th July 2013, 05:11 PM #2GOLD MEMBER
- Join Date
- Jun 2010
- Location
- shoalhaven n.s.w
- Posts
- 1,240
nice work! you could of used your moccasins instead of the cow hide!
-
14th July 2013, 05:19 PM #3GOLD MEMBER
- Join Date
- Jun 2006
- Location
- Burwood NSW
- Age
- 82
- Posts
- 1,247
Interesting project.
Is the cross section inside buffalo horns round, or did you have to shape the joiner to fit?
Ted
-
14th July 2013, 08:06 PM #4GOLD MEMBER
- Join Date
- May 2011
- Location
- Murray Bridge SA
- Posts
- 3,339
Nice job, can't be to cold there, you're wearing shorts!!!!
Kryn
-
14th July 2013, 08:20 PM #5
-
14th July 2013, 08:22 PM #6
-
14th July 2013, 09:03 PM #7
-
14th July 2013, 10:35 PM #8
I bet he was Mooved by the job you did for him
Regards Michaelenjoy life we are only here a short time not a long time
-
16th July 2013, 06:07 PM #9Senior Member
- Join Date
- Nov 2012
- Location
- Australia
- Posts
- 146
-
17th July 2013, 10:30 PM #10
Similar Threads
-
Bull Oak
By crebra in forum TIMBERReplies: 22Last Post: 23rd November 2018, 12:00 AM -
Bull Elk
By Seyit in forum SCROLLERS FORUMReplies: 7Last Post: 13th November 2010, 01:08 AM -
cross cut bull oak
By texx in forum WOODTURNING - PEN TURNINGReplies: 9Last Post: 6th March 2010, 12:20 PM -
Sitting bull
By springwater in forum WOODWORK PICSReplies: 3Last Post: 24th August 2009, 08:22 AM -
All Bull
By gatiep in forum WOODIES JOKESReplies: 0Last Post: 5th February 2005, 02:14 AM