Thread: M2 HSS Turning Chisel Batch Order

Thanks for that Cliff, your advice is very timely and greatly appreciated, I'll do the grinding as follows...

6mm +-15 == 30
12mm +-17.5 == 35
20mm +-20 == 40
30mm +-20 == 40

Regards
Ray

No need to 'phew' Ray. This is top gear. Thanks again.

...

Can I suggest that you wait for more feedback from others who've ordered the skews?

(IMO a 40-45º included angle is a good starting point. In any case folk will be able to roll their own as we turners are used to grinding metal so don't sweat on this one).

That should be fine Ray, the little ones need the shallow angle to get into the details.
It the angle is too steep, there is bugger all bevel to rub & the shoulders get in the way.

If that 12mm skew is still free I'll take it
let me know the all up cost and I'll transfer the monies

I will send you a PM.

Originally Posted by Sawdust Maker

If that 12mm skew is still free I'll take it
let me know the all up cost and I'll transfer the monies

Here is an updated list of what has been picked up and what is left over. At this point we have THREE 4.5 mm thick Munro Scraper and FOUR 6 wide x 4.5 mm thick Skews.

Thanks Helmut

monies transferred today

PS I hope it is acid etched with 'made by thumbsucker" on it

Just wondering when the skew might arrive.
Bruce crow400

Yes, can you please tell us approximately when you plan to post the tools.
Thanks,
Geoff1153

Reply to Skew enquiry would be nice.
Regards,
Bruce crow400

Hi Geoff, Bruce,

Apologies for the delay, I've just been swamped with work in the last couple of weeks...

I hope I can get back to finishing the skews soon...

Regards
Ray

This really has become quite laughable. I do hope the errant skew beats the grim reaper.
Bruce

I can grind my own if it helps, I'd just like to see them before I go. Phil

I would really like to know when I might receive my order too.