Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 181 to 192 of 192
-
20th June 2012, 10:37 PM #181
Please accept my apology on behalf of RayG. He has been busy with another major project that he has just wrapped up, yesterday. This other projects is gargantuan in comparison to the batch order, with as far as I can assertion it has a critical commercial time critical component. RayG has promised me that he "will be able to get the grinding back under control.". ASAP. He should be delivering on his promises shortly. So please hold for just a little longer.
-
20th June 2012 10:37 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
9th July 2012, 09:17 AM #182SENIOR MEMBER
- Join Date
- Feb 2008
- Location
- Nth of Newcastle
- Age
- 77
- Posts
- 811
The plane blade section of this********* seems to be delayed by a further few months
Does this apply to our skews to ? Phil
-
9th July 2012, 05:16 PM #183
Regrettable RayG is now in Austria and he will not be back until the 7th of September. Before he left RayG said that the turning chisels were done except for the bevels.
Their is nothing that I can do until Ray returns.
-
9th July 2012, 07:00 PM #184SENIOR MEMBER
- Join Date
- Feb 2008
- Location
- Nth of Newcastle
- Age
- 77
- Posts
- 811
I thought the only grinding on the skews was the bevel ?
phil
-
9th July 2012, 07:08 PM #185
Originally the turning tools were supposed to have NO surface grinding. Just check the early pages of this thread. This is why the cost was so low. RayG however opted to surface grind all faces. He wants to give everyone the best tools they could ever get, regardless of the time it took. However other commercial commitments have taken him away from us for two months.
Those who got their turning scrapers can vouch the tools are finely finished.
Ray is extremely remorseful for taking so long.
-
9th July 2012, 09:28 PM #186
Stuff happens. I think I will just chill and wait. The cost verses the quality, based on others previous experience with other batch orders, will be worth the wait I feel.
CheersThere ain't no devil, it's just god when he's drunk!!
Tom Waits
-
14th November 2012, 04:44 PM #187
curious
Any further word?
regards
Nick
veni, vidi, tornavi
Without wood it's just ...
-
14th November 2012, 06:39 PM #188
Hi Nick,
Good timing.. There's a thread in the hand tool section with updates https://www.woodworkforums.com/f152/p...report-160896/
Josh has been picking up the slack while I've been crook, he's been finishing the plane blades, I've still got a few minor things to do before the turning chisels are ready to post out,
In the next few days you should get a PM requesting 1) postal address confirmation and 2) details of the order being posted,
Regards
Ray
-
14th November 2012, 09:35 PM #189
Thanks
BTW No pressure, I was just enquiring as I know how these 'steel' buys go, having been in one or two in the past.
thanks for all your workregards
Nick
veni, vidi, tornavi
Without wood it's just ...
-
14th November 2012, 10:24 PM #190
still waiting for 2 turning scraper tips were meant to have been ready about june ??
-
17th November 2012, 12:21 PM #191
-
6th December 2012, 07:21 PM #192
Drillit and Enfield Guy have sent me a PM asking for an update on the turning chisels. I sent RayG and Josh a few PM's & emails asking for an update. At this point I have not heard anything from them regarding the turning tools. As far as I can tell they are both busy with the firmer chisels. They have updated this thread regularly. All I can say is that they are working on things as fast they can. Niggling them, will only draw their annoyance.
Note: in the above linked thread there is a reference by Josh to grinding bevels on the skews. Josh is not referring to skew chisels but skew plane blades.
Regrettable - Helmut
Similar Threads
-
Second Paring Chisel Batch Order
By thumbsucker in forum HAND TOOLS - UNPOWEREDReplies: 131Last Post: 26th September 2012, 08:42 PM -
Third Plane Blades for Wooden Hand Planes Batch Order
By thumbsucker in forum HAND TOOLS - UNPOWEREDReplies: 284Last Post: 4th July 2012, 08:57 PM -
Paring Chisel Batch Order
By thumbsucker in forum HAND TOOLS - UNPOWEREDReplies: 543Last Post: 24th October 2010, 09:05 AM -
Handles for Group Chisel Order
By funkychicken in forum HAND TOOLS - UNPOWEREDReplies: 7Last Post: 12th December 2008, 11:39 PM -
D2 Plane Blades - Batch Order 02
By thumbsucker in forum HAND TOOLS - UNPOWEREDReplies: 259Last Post: 16th November 2008, 08:34 PM