Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 91 to 105 of 192
-
14th April 2011, 09:34 PM #91
Just a note to say that most blokes here wanted the 7 mm sheet so did the blokes who wanted the firmer chisels. The blokes who are after plane blades were split 50/50. So I have decided that we will go with the 7 mm thick sheet.
Also three blokes from the fine pairing chisel order have reduced their orders so we should now be able to fit unto the 4.5 mm sheet. So we will not have to cull any of the turning scrapers.
Expect movement on this order within two weeks. As I am finalizing the last details at the moment. I will send out a PM with bank details soon.
-
14th April 2011 09:34 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
20th April 2011, 11:46 PM #92Deceased
- Join Date
- Jun 2003
- Location
- ...
- Posts
- 7,955
-
21st April 2011, 07:40 PM #93
Sturdee - I have removed the scrapers from your order.
-
21st April 2011, 11:18 PM #94Member
- Join Date
- Apr 2006
- Location
- Melbourne
- Posts
- 93
Thumbsucker, can you also confirm my scraper blades have also been deleted
from the order. (refer my post #86). I am in a similar position to Sturdy.
Cheers, John
-
13th May 2011, 09:28 PM #95
letzzzgo just confirming that you have been removed.
-
9th June 2011, 11:37 PM #96
May I ask? Where are we up to with this?
CheersThere ain't no devil, it's just god when he's drunk!!
Tom Waits
-
10th June 2011, 10:35 AM #97
We are ready to go. I am however very busy with Uni. exams and do not have the time to make the last confirming calls and emails to everyone, and manufacturers. In two weeks I will have time.
-
10th June 2011, 11:03 AM #98
Hi TS, not sure if you have any leftovers on your spread sheets but if a 30mm skew is in the mix I will take it off your hands. If not then next time round.
-
11th June 2011, 04:33 PM #99
All good. No pressure. Just curious.
Hope you do well with your exams.
CheersThere ain't no devil, it's just god when he's drunk!!
Tom Waits
-
27th June 2011, 06:46 PM #100
Its times to start collecting funds to get the ball rolling on the following orders:
- Paring Chisels
- Firmer Chisels
- Turning Chisels & Scrapers
- Plane Blades for Wooden Handplanes
Now their are 57 members participating across all five orders. Totaling over 406 items. To see a complete list of what you have ordered please see the attached spreadsheet in PDF format I will by the end of this day send out a PM, to everyone of the 57 participants informing them, of what they have ordered, and how much they owe. and into what account they need to transfer the funds into and by what date.
Here is the pdf.
-
27th June 2011, 07:26 PM #101
-
29th June 2011, 11:28 AM #102
helmut,
Either there is a typo or stuff up. I'm down for 3 of the munro type scrapers, when it should be 2 of each scraper type.
Can you please advise.
.Regards
TT
________________________________________________
Quotes;
"He who dies with the most toys ...errr ... tools wins"
"Anybody can become a woodworker, but only a Craftsmen can hide his mistakes!"
"I work to support my woodworking habit."
"Turn it, don't burn it!"
... and my personal favourite ...
"It's not a mistake, it's a design feature!"
-
29th June 2011, 11:56 AM #103
-
29th June 2011, 06:08 PM #104Senior Member
- Join Date
- Dec 2009
- Location
- Mandurah WA
- Age
- 60
- Posts
- 351
Hi T.S.,
If thumb trimmer wants my sorby scraper tips he can have them, and Claw Hama can have one of my 30mm skews too.
Thanks
SteveLast edited by stuffy; 29th June 2011 at 06:10 PM. Reason: spelling
-
29th June 2011, 06:30 PM #105
much appreciated steve.
if your ok with it Helmut, 2 of esch scraper tips pleaseRegards
TT
________________________________________________
Quotes;
"He who dies with the most toys ...errr ... tools wins"
"Anybody can become a woodworker, but only a Craftsmen can hide his mistakes!"
"I work to support my woodworking habit."
"Turn it, don't burn it!"
... and my personal favourite ...
"It's not a mistake, it's a design feature!"
Similar Threads
-
Second Paring Chisel Batch Order
By thumbsucker in forum HAND TOOLS - UNPOWEREDReplies: 131Last Post: 26th September 2012, 08:42 PM -
Third Plane Blades for Wooden Hand Planes Batch Order
By thumbsucker in forum HAND TOOLS - UNPOWEREDReplies: 284Last Post: 4th July 2012, 08:57 PM -
Paring Chisel Batch Order
By thumbsucker in forum HAND TOOLS - UNPOWEREDReplies: 543Last Post: 24th October 2010, 09:05 AM -
Handles for Group Chisel Order
By funkychicken in forum HAND TOOLS - UNPOWEREDReplies: 7Last Post: 12th December 2008, 11:39 PM -
D2 Plane Blades - Batch Order 02
By thumbsucker in forum HAND TOOLS - UNPOWEREDReplies: 259Last Post: 16th November 2008, 08:34 PM