Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 11 of 11
Thread: Magnifying thingies?
-
27th July 2014, 06:39 AM #1
Magnifying thingies?
I really enjoy my time in the workshop. I had a 6" magnifying glass in a chrome ring frame and couldn't decide just what to do with it. After a lot of thought I decided that it would look nice on an oak mount that swivelled and this is the result
Made from an old English oak TV cabinet given to me by a friend wot got a haunted fish tank far too big for it.
Now for a ladies dressing table mirror in a similar style as a pressie for my d-in-law I hopeMy ambition is to grow old disgracefully. So far my ywife recons that I'm doing quite well! John.
http://johnamandiers.wixsite.com/johns-w-o-w-1
-
27th July 2014 06:39 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
27th July 2014, 05:09 PM #2
Nicely done!
The swivels are just wooden pins?
- Andy Mc
-
27th July 2014, 06:04 PM #3
Ta Skew. Yes they are 8mm pins and a slight interference fit and not glued.
The small 'saddles' just reenforce the rim as it isn't very thick.My ambition is to grow old disgracefully. So far my ywife recons that I'm doing quite well! John.
http://johnamandiers.wixsite.com/johns-w-o-w-1
-
27th July 2014, 06:14 PM #4
very impressive, with a magnificent finish.
Inspiration exists, but it has to find you working. — Pablo Picasso
-
27th July 2014, 08:18 PM #5
I like it , especially the offset support frame thingie
Neil____________________________________________Every day presents an opportunity to learn something new
-
27th July 2014, 08:29 PM #6
I got the idea from what I call my 'moon ball', entered into a UK forum some while back. One of them is in Aussy now with my sister in Lawrence, NSW. Awkward to get it right but not difficult with care. Mounted on a screw chuck with the hole in the middle of the blank.
Then when the outside is finished on to a second hole offset about 3/4" and the inner surface turned down till it's held by about 1/8". Sawn off om my band saw and sanded on my Carol drum sander. Drilling the holes for the mount is tricky to get them aligned correctly!My ambition is to grow old disgracefully. So far my ywife recons that I'm doing quite well! John.
http://johnamandiers.wixsite.com/johns-w-o-w-1
-
27th July 2014, 08:55 PM #7My ambition is to grow old disgracefully. So far my ywife recons that I'm doing quite well! John.
http://johnamandiers.wixsite.com/johns-w-o-w-1
-
29th July 2014, 03:32 AM #8
-
29th July 2014, 07:40 AM #9
I have to agree with you Dalboy, I too like the moonball better, but when you have a 6" magnifying glass sat in a chrome ring doing nothing and you want to show it ???
About 20 odd years back I was taliking to a friend about an old Naval telescope final lens he had, about 120 years old, and he said that he had always wanted to display it and I offered to set it for him. At the time I had no ideas and had to look at it along with what I had. I had some English elm and decided that I could make a stand for it from one piece of that elm and this was the outcome. Sorry about the photo quatility
If I had had the confidence then that I have now it would have been better?
Just noticed.. The original photos in this post are of a 6" magnifying lens and not a mirror. The mirror is nearly finished and I hope will be good?My ambition is to grow old disgracefully. So far my ywife recons that I'm doing quite well! John.
http://johnamandiers.wixsite.com/johns-w-o-w-1
-
29th July 2014, 07:43 AM #10
I forgot to say that the old Naval lens was also 6" diameter. I pity the poor sod wot had to hold that up for hours on end in the hope of spotting Lord Nelsons singnals? Well, at that size perhaps he could see back in time???
My ambition is to grow old disgracefully. So far my ywife recons that I'm doing quite well! John.
http://johnamandiers.wixsite.com/johns-w-o-w-1
-
29th July 2014, 06:00 PM #11
I agree it is far better to have made something unique from something that is a standard item.
Similar Threads
-
Magnifying Glass
By Dalboy in forum WOODTURNING - GENERALReplies: 11Last Post: 16th September 2012, 09:15 PM -
Best Magnifying Visor Recommendations?
By Woodtec in forum SCROLLERS FORUMReplies: 6Last Post: 27th March 2010, 10:57 PM -
Cyprus Burl pen and magnifying glass
By munruben in forum WOODTURNING - PEN TURNINGReplies: 11Last Post: 19th November 2009, 07:59 AM -
What are these ant thingies?
By I_wanna_Shed in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 5Last Post: 11th January 2009, 11:01 PM -
those bra thingies
By Kev Y. in forum WOODIES JOKESReplies: 15Last Post: 14th November 2005, 12:30 AM