Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: MC 1018 drive belt replacement
-
25th September 2013, 02:02 PM #1New Member
- Join Date
- Sep 2013
- Location
- Darwin NT
- Posts
- 1
MC 1018 drive belt replacement
Two questions
I am replacing a shredded drive belt on a mini lathe model MC1018
(belts don't like the harsh conditions up here in darwin as compared to southern highlands nsw)
First question
where can I get a couple of replacement belts?
second question
how do I get this lathe apart to fit the drive belt? see picture attached
i have removed hand brake, taken pin out of pulley - what next?
thanks
RichardNT
-
25th September 2013 02:02 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
25th September 2013, 04:33 PM #2
Timbecon MC1018
This is a timbecon lathe so they should be able to supply the belts.
There is a couple of circlips in the head stock that need to be removed for you to get the shaft out.
Have a look here on page 21 of the parts list
http://manuals.harborfreight.com/man...5999/65345.pdfJim Carroll
One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!
-
26th September 2013, 06:48 AM #3GOLD MEMBER
- Join Date
- Sep 2008
- Location
- North Carolina, USA
- Posts
- 2,327
Similar Threads
-
Replacement drive belts
By rtyuiop in forum WOODTURNING - GENERALReplies: 12Last Post: 8th December 2023, 03:53 PM -
Drive Belt Replacement
By IanA in forum WOODTURNING - GENERALReplies: 18Last Post: 10th August 2021, 08:39 PM -
I need a drive belt
By Madyak in forum BANDSAWSReplies: 5Last Post: 9th September 2013, 01:25 PM -
Drive belt cb76k belt sander
By Tiger in forum HAND TOOLS - POWEREDReplies: 2Last Post: 2nd February 2012, 01:30 PM -
Talon thicknesser-drive belt melted ! Need replacement.
By damianq in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 13Last Post: 20th August 2010, 12:57 PM