Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 31 to 34 of 34
Thread: Metal to Wood !
-
3rd April 2012, 12:18 AM #31
You beat me John
Neil____________________________________________Every day presents an opportunity to learn something new
-
3rd April 2012 12:18 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
3rd April 2012, 06:25 PM #32Senior Member
- Join Date
- Mar 2009
- Location
- Blue Mountains
- Posts
- 175
Bowl turning?
Hi,
can these devices be set up to cut a concave shape in the end of a blank, that is, hollow out a bowl to a set radius? It should be possible by moving the main pivot towards the tail stock and reversing the tool holder on the arm. Any thoughts?
Mm. (visiting from the metal work forum.)
-
3rd April 2012, 09:29 PM #33
-
27th April 2012, 10:17 PM #34
Ok Been a while since I played with this,taking advice from wiser heads I made a rounded tool holder and offset the tool from its original inline to 25 degrees offset ,this will allow me to part off the ball if necessary ,just have to make another tool to do that now ,not difficult
here's some pictures of the changes the ball is about 60mm dia , cheers ~ JohnG'day all !Enjoy your stay !!!
Similar Threads
-
wood to metal?
By fozzy767 in forum WOODTURNING - GENERALReplies: 2Last Post: 11th November 2011, 01:04 PM -
metal and wood
By dan mosheim in forum METALWORK FORUMReplies: 9Last Post: 5th May 2011, 10:38 PM -
Metal Inlay Into Wood - Resin/Epoxy with metal powder?
By r5e in forum WOODWORK - GENERALReplies: 14Last Post: 15th March 2010, 11:17 AM -
metal and wood
By fletty in forum WOODWORK - GENERALReplies: 14Last Post: 19th June 2009, 10:30 AM -
Bits of wood and metal
By dan_tom in forum WOODWORK PICSReplies: 3Last Post: 1st March 2005, 08:32 AM