Thanks Thanks:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 8 of 8
  1. #1
    Join Date
    May 1999
    Location
    Grovedale (Geelong) Victoria
    Age
    74
    Posts
    12,183

    Default Mini lathe or Tiny Hayes?

    Just been going through some old photo's looking for a couple of things and came across this picture. Taken in in 1988 from memory at what was our Central Victorian School of Woodcrafts. It was a woodworkers club demo night with the late great Tiny Hayes North Queensland woodturner extraordinary.

    Question:
    Is that a miniature lathe or a huge man.

    Answer:
    They didn't call him Tiny for nothing.... That is a standard height lathe. Centre height is 42" (3" 7" or 107mm)


    Tiny Hayes.jpg

    Cheers - Neil

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #2
    Join Date
    Jul 2008
    Location
    act
    Posts
    880

    Default

    I gather he died of a back ache!

  4. #3
    Join Date
    Nov 2007
    Location
    Albury Well Just Outside
    Posts
    13,315

    Default

    Why did you guys not provide him a stool to sit on while turning on the lathe?

  5. #4
    Join Date
    Jul 2005
    Location
    Oberon, NSW
    Age
    63
    Posts
    13,354

    Default

    He'd probably have found it more comfortable if he'd stood the lathe on end, like a pedestal drill!
    I may be weird, but I'm saving up to become eccentric.

    - Andy Mc

  6. #5
    Join Date
    Nov 2007
    Location
    Dundowran Beach
    Age
    76
    Posts
    19,922

    Thumbs up

    Love the safety boots!

  7. #6
    Join Date
    Oct 2008
    Location
    Leopold, Victoria
    Age
    65
    Posts
    4,678

    Default

    So just how tall was he? Is that a Golding lathe he is using?

  8. #7
    Join Date
    May 1999
    Location
    Grovedale (Geelong) Victoria
    Age
    74
    Posts
    12,183

    Default

    Yep that's definitely a Golding lathe, Had 20 of them at one time, Cheap but reliable and worked really well for what they were. How tall was Tiny. Bloody tall best part of 7" but big all over, he wore the sandals all the time because ha couldn't get anything else to fit his massive feet size 16 sandals and if you look at his feet they are hanging a long way over the end of the footwear.

    Voice that sounded like rumbling thunder and sometimes a temperament to to match.

    Story from a reliable source who saw it goes a little like this: Tiny had 2 Asian gentlemen working for him (this is back in the late 50's early 60's) They were sitting on stools at the lathe doing repetition work. The source was a young aspiring woodturner who was just about to approach Tiny of a job. When one of Asian gentlemen sailed past him through the front door and onto the street, stool and all. The source summoned up the courage to ask Mr Hayes if he might try out for a job. You've got good timing son he roared. "Pick up that stool and get in here. You'd better be good or you and his mat will get the same treatment."

    The source went on to run his own very successful turning business later in life.

    From Tiny's lips: He got a job to turn 3,000 breadboards at 2/- each and only a week to do it in. He made up a quick release vacuum chuck and hung old army blankets all around his work area. the blanks were pre-cut and all he had to do was turn a moulding on the edge and a couple of v cuts on the outer edge of the face of the board.

    He turned the lathe on and the vacuum chuck roughly centred the breadboard bland and proceeded at all haste. As he finished the turning he hit a foot peddle which momentarily turned off the vacuum, the finished board flew off the lathe and into the blankets, within seconds the next blank was on the chuck turned and off into the blankets. He had someone grabbond the boards to stack them ready for delivery and he could barely keep pace with Tiny's speed at churning out these randomly aimed missiles.

    Tiny claimed to have finished the job in under 4 days.

    A very, very interesting and talented man and one if woodturnings true characters.

    Tiny left this life in 2002.

    Cheers - Neil

    PS Have one of his home made calculators which he gave to my son. Flat piece of wood with 5 holes in it through which you placed your fingers. It has a string attached and when asked what the string was for would always say with a dry snigger. That's your memory.

  9. #8
    Join Date
    Jun 2010
    Location
    shoalhaven n.s.w
    Posts
    1,240

    Default

    did you ever see his belt holder and cooee stick? I got to meet the man mountain in the 1990's when my boss bought an auto Lathe off him.

Similar Threads

  1. Tiny hinges? And I mean tiny
    By tea lady in forum TOY MAKING
    Replies: 9
    Last Post: 14th February 2012, 05:25 PM
  2. Where to buy tiny screws
    By Arron in forum WOODWORK - GENERAL
    Replies: 9
    Last Post: 6th June 2011, 02:32 PM
  3. Isaac Hayes
    By prozac in forum NOTHING AT ALL TO DO WITH WOODWORK
    Replies: 5
    Last Post: 11th August 2008, 09:39 PM
  4. Tiny Hayes
    By ubeaut in forum WOODTURNING - GENERAL
    Replies: 0
    Last Post: 6th February 2002, 02:54 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •