Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 12 of 12
Thread: More presents
-
19th February 2014, 05:15 AM #1
More presents
I went out today to collect some ink through freecycle for my old A3 printer, well on the way back three men cutting down a beech tree. Stopped the car and ask what are they going to do with it
"going to burn it"
"oh can I please have some"
And they even loaded the car for me.
As you can see they had already cut it into short lengths, have now split in half and sealed the ends
I am having a great start to the year with the logs the other day and also the blanks I was given last weekend, can it get any better I hope so
I took two photo's to show the diameter and length I only had 1 ruler to hand at the time
DSCF2766.jpgDSCF2767.jpg
I think I am turning into a wood womble
-
19th February 2014 05:15 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
19th February 2014, 06:49 AM #2Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
Good score sire!! Nothing like a good freebie!!
Now be a sensible lad - seal the ends and store in a safe place.!
-
19th February 2014, 07:08 AM #3
I did it as soon as i got home, and it was hard work only had a hand axe and a club hammer as I cut them in half my other half was painting the ends
Nice to have a nice sized piece may even rough turn them after I buy a wet suit as they had only been cut about an hour before I saw them
-
20th February 2014, 10:05 AM #4
Derek top score nice size and beaut timber.
What no Bandsaw cut straight down the pith leave em outside to spalt a little or sit them near the fire and dry them quick just don't be tempted to burn them
-
20th February 2014, 10:20 AM #5
-
20th February 2014, 11:55 AM #6
Free wood is awesome. And you saved it from the burn pile.
Bret
-
20th February 2014, 07:03 PM #7
Very good score. Now only time needs to pass.
-
20th February 2014, 07:59 PM #8GOLD MEMBER
- Join Date
- Dec 2010
- Location
- Mornington Peninsula
- Posts
- 2,750
A question from someone who is ignorant in these matters.
Why do you only seal the ends with such a, relatively, small log? I would have thought it best to seal all the open areas of wood. Can you clarify?
-
20th February 2014, 08:16 PM #9SENIOR MEMBER
- Join Date
- Jul 2001
- Location
- South Australia
- Posts
- 650
Think of the grain of the wood like a handful of drinking straws.
The moisture will leave the wood quickly from the ends of the straws.
The aim is to seal the ends of the straws which will force the moisture out through the walls of the straws.
This slows down the drying process and results in less cracking.
This is a simplified explanation, there are many factors involved with drying wood, luck being one of them.
Cheers
TimSome days I turns thisaway, somedays I turns thataway and other days I don't give a stuff so I don't turn at all.
-
20th February 2014, 09:18 PM #10GOLD MEMBER
- Join Date
- Dec 2010
- Location
- Mornington Peninsula
- Posts
- 2,750
I understand the sealing of the ends, however wouldn't sealing of the open sides as well (in this case) also slow down the drying process even more? Moisture could escape through the bark surface.
Or is this overkill?
-
20th February 2014, 09:43 PM #11
Thank you Tim for answering that for me, you probably put it better than I could.
Cava the wood still needs to get rid of moister and as Tim said it dries much slower from the side than the ends.
This does not mean that the wood will not split as there are some that are so hard to dry as they split more readily like cherry.
Ideally when I get logs I like to seal the ends straight away and leave them as long as possible, in this case the people had already cut them to the length that you see. Mind you I don't think that I could have lifted them if they had been longer.
Another point worth mentioning is by cutting down the centre also helps reduce cracking if you need to use the full log for say a hollow form then rough turning it will also help. Even after all the precautions it does not guarantee that it will not split
-
7th March 2014, 06:48 AM #12
I had not taking much notice of any grain when I first split the logs and sealed the ends.
The logs still needed to be cut down further, well had a nice sunny day today and managed to get the chainsaw out and cut them to usable sizes, luckily did not have to reseal as all the cuts where along the grain and not across.
Well I was pleasantly surprised as this is what I found
DSCF2877.jpg
Should produce some nice turned pieces if I can do them justice and I have 12 pieces like this or very similar .
Similar Threads
-
Christmas Presents
By Paul O'H. Ingersoll Canad in forum WOODWORK - GENERALReplies: 6Last Post: 18th December 2009, 07:49 AM -
Presents for my Groomsmen
By bassmansimon in forum WOODWORK - GENERALReplies: 17Last Post: 29th September 2009, 01:32 AM -
Presents for my Groomsmen
By bassmansimon in forum BOX MAKINGReplies: 2Last Post: 13th September 2009, 08:49 AM -
Presents ? What Presents ?
By Steve_DownUnder in forum WOODWORK - GENERALReplies: 9Last Post: 19th May 2006, 09:21 AM -
Xmas presents
By simon c in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 18Last Post: 15th November 2004, 07:30 PM