Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 20 of 20
Thread: Narrow beads with skew
-
7th September 2010, 06:25 PM #16GOLD MEMBER
- Join Date
- Jan 2007
- Location
- Adelaide
- Posts
- 2,794
Something like this?
-
7th September 2010 06:25 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
7th September 2010, 06:39 PM #17
Yes.
-
8th September 2010, 12:59 AM #18GOLD MEMBER
- Join Date
- Jan 2007
- Location
- Adelaide
- Posts
- 2,794
You might be interested in my tamed skew, then.
-
8th September 2010, 01:04 AM #19John Lucas
- Join Date
- May 2010
- Location
- Cookeville, TN, USA
- Posts
- 57
You might consider making a beading tool. They are quite easy to make. Take a flat blade screwdriver. Drill a hole hear the tip with the appropriate size drill. Then cut or grind away metal until you have a half a bead shape. The grind the sides down the spacing you want between the beads or you can grind them down to a point if you want no spacing. Grind some relief on the front. To sharpen I just polish the top surface using diamond hones. I polish it close to a mirror finish.
I make mine using Drill rod. I heat the tip red hot and flatten it. Then I go through the same procedure as above. Then I heat treat it to harden the cutting surface. This makes a thicker tool that chatters less than the screwdrivers.
-
8th September 2010, 01:08 AM #20GOLD MEMBER
- Join Date
- Jan 2007
- Location
- Adelaide
- Posts
- 2,794
Second that. For repetitive work that's what I would do also. Then again, I find more satisfaction in tool making than in turning...
Similar Threads
-
wooden beads
By Hambone in forum WOODTURNING - GENERALReplies: 0Last Post: 8th February 2010, 05:58 PM -
rosary beads
By mkypenturner in forum WOODTURNING - GENERALReplies: 4Last Post: 7th June 2009, 12:42 AM -
Beads on facework
By Tiger in forum WOODTURNING - GENERALReplies: 7Last Post: 14th May 2009, 12:15 PM -
First beads on a little bowl
By jefferson in forum WOODTURNING - GENERALReplies: 11Last Post: 17th March 2009, 11:32 PM -
Wooden beads
By richardbb in forum WOODWORK - GENERALReplies: 13Last Post: 13th April 2008, 11:19 PM