Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 19 of 19
-
17th February 2014, 11:46 AM #16Member
- Join Date
- Apr 2010
- Location
- clayton
- Posts
- 58
Jimmy clewes bowl gouges
Hi TL,I can't take photos but here are the measurements
Thompson 5/8"---- stock 16.5mm Flute width 10.17 or 51% flute depth 50%
Jimmy Clewes 1/2" stock 13.25mm flute width 8.85 or 66% flute depth 50% Vee is wider at the top, less so but still wider at the bottom, with less steel under the flute
Jimmy Clewes 3/8" stock 9.88mm Flute with 6mm or 60% flute depth 41% once again a wide flute but shallower more steel under the flute.
The offer to try them is still open. Jay
-
17th February 2014 11:46 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
17th February 2014, 01:04 PM #17anne-maria.
Tea Lady
(White with none)
Follow my little workshop/gallery on facebook. things of clay and wood.
-
17th February 2014, 01:16 PM #18Retired
- Join Date
- May 1999
- Location
- Tooradin,Victoria,Australia
- Age
- 73
- Posts
- 11,918
Jay. I removed your phone number and PM'd it to Tea Lady.
-
17th February 2014, 01:46 PM #19Member
- Join Date
- Apr 2010
- Location
- clayton
- Posts
- 58
Ta
Hi , sorry for the inconvenience thought I was doing the wrong thing. I am having a bad day. Sorry once again, Jay
Similar Threads
-
D-way vs Thompson gouge
By NeilS in forum WOODTURNING - GENERALReplies: 30Last Post: 16th April 2018, 06:47 PM -
Thompson bowl gouge - first impressions
By rsser in forum WOODTURNING - GENERALReplies: 19Last Post: 8th August 2009, 02:08 PM -
WIP New handle for Thompson Gouge
By Todd Glover in forum WOODTURNING - GENERALReplies: 7Last Post: 23rd November 2008, 02:45 PM