Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Needle Holder Key Rings
-
19th January 2005, 04:48 PM #1
21 with 26 years experience
- Join Date
- May 2004
- Location
- Sunshine Coast Queensland
- Age
- 53
- Posts
- 1,402
Needle Holder Key Rings
Anyone made these, it's basically a metal tube about 10mm diameter with fittings on the end.
I'm thinking you turn it on a mandrel like a pen, can you get bushes for the pen mandrel or should I should just make a mandrel using a drilll chuck and a bolt.
Cheers
Paul
-
19th January 2005 04:48 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
19th January 2005, 06:33 PM #2
Old Phart
- Join Date
- Aug 2003
- Location
- Perth, WA
- Posts
- 1,251
Make your own bushes from small pieces of Jarrah.
Drill a hole the same size as your mandrel then turn down to the ID of the brass tube.
Carbatec and Timbecon have a selection of bushes for the mandrels, might be one to fit the key ring tube.
Model shops have brass tube the same ID as the mandrels with assorted OD, could use that to make your own bushes.
-
20th January 2005, 03:14 PM #3
Retired and loving it
- Join Date
- Jan 2002
- Location
- Yinnar, Victoria, Australia
- Age
- 66
- Posts
- 1,277
Paul.. this maybe something like what you are after.
http://www.teknatool.com/projects/Tr...k%20Veitch.pdfI try and do new things twice.. the first time to see if I can do it.. the second time to see if I like it
Kev
-
20th January 2005, 07:46 PM #4
21 with 26 years experience
- Join Date
- May 2004
- Location
- Sunshine Coast Queensland
- Age
- 53
- Posts
- 1,402
Thanks Kev,
That's a home made version of the kit I got but something to play with.
Cheers
Paul
Reply With Quote
