Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 20 of 20
Thread: Nova Infinity System
-
13th December 2013, 09:16 PM #16
There is a warning inn their "Additional Safety Notes" not to run it in reverse or without a workpiece in the chuck.
Some extracts from the Infinity manual,
18. DO NOT ROTATE CHUCK UNDER POWER WITHOUT WOOD BEING GRIPPED
21 DO NOT TURN IN REVERSE. Do not use this chuck for reverse turning operations, light reverse operations i.e. sanding are allowed. Speed not above 2000 rpm.
27 DO NOT USE WITH ANY COPYTURNER OPERATIONS
29 WARNING FOR <st1:stockticker>SAFE</st1:stockticker> OPERATION. DO NOT EXTEND JAW SLIDES BEYOND CHUCK BODY UNDER ANY CIRCUMSTANCES
Troubleshooting Guide
Problem
4. Jaw Slides closed to centre and No. 1 slide stays in centre when jaws are expanded again.
Possible Cause and Solution
Jaw Slide(s) have over travelled from scroll. It will be necessary to tap back No 1 jaw slide until it has re-engaged. See 'insertion of jaw slide' in this manual.
-
13th December 2013 09:16 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
13th December 2013, 09:21 PM #17SENIOR MEMBER
- Join Date
- Oct 2009
- Location
- South Africa
- Posts
- 950
-
13th December 2013, 09:54 PM #18
If you want to have a look at the guts of the chuck go here Go Quick Change
-
14th December 2013, 04:19 PM #19Hewer of wood
- Join Date
- Jan 2002
- Location
- Melbourne, Aus.
- Age
- 71
- Posts
- 12,746
Good to see the 'tool company innovating again. I think that's clever. I hope their machining is up to it.
I never tried it but some turners have: knock out the stop pin from your Vicmarc chuck having fitted slide spares permanently to your jaws. Just feed them in instead of dealing with 8 screws. Of course this too could lead to embarrassment.Cheers, Ern
-
14th December 2013, 09:25 PM #20
Similar Threads
-
Nova Sharpening System
By Ross in forum SHARPENINGReplies: 2Last Post: 7th August 2010, 08:16 PM -
Infinity models
By trollhameran in forum WOODWORK - GENERALReplies: 0Last Post: 31st July 2010, 08:22 PM -
Chuck mount for Nova Live Centre System owners
By rsser in forum WOODTURNING - GENERALReplies: 36Last Post: 21st March 2010, 05:30 PM -
Teknatool NOVA Acruline System
By Pat in forum WOODTURNING - GENERALReplies: 16Last Post: 7th May 2008, 10:09 PM