Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: Oak Bowl
-
1st July 2015, 04:38 AM #1
Oak Bowl
I have had this blank sitting in the wood shed for some time, anyway thought I would have a go at turning it.
This measures 13" across and is 2" deep and as the title is from Oak which was hard many trips to the grinder even after attacking it with a carbide tool.
Sanded to 600grit and finished with Cellulose sander sealer and the on to the wheeled buffing system.
DSCF5157.JPGDSCF5158.JPGDSCF5159.JPGDSCF5160.JPG
-
1st July 2015 04:38 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
1st July 2015, 08:51 AM #2GOLD MEMBER
- Join Date
- Aug 2012
- Location
- Imbil
- Posts
- 1,167
Hi Dalboy,
The simple lines of this piece make for a very pleasing shape and the finish is very sharp combining to create a special piece well done again.
Regards Rod.
Similar Threads
-
First bowl
By torchwood in forum WOODTURNING - GENERALReplies: 9Last Post: 6th June 2012, 10:42 AM -
Vicmarc bowl gouges and bowl gouge help
By nz_carver in forum WOODTURNING - GENERALReplies: 3Last Post: 11th May 2012, 05:30 PM -
First bowl / first segmented bowl
By Timber stacker in forum WOODTURNING - GENERALReplies: 6Last Post: 3rd May 2009, 03:01 PM -
The big one--bowl
By Auzzie turner in forum WOODTURNING - GENERALReplies: 14Last Post: 9th September 2006, 01:27 PM