Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: outboard turning bit
-
5th August 2010, 09:16 PM #1
outboard turning bit
HI All
Hi have just got the parts from Trend to set up the Cougar for out board turning I have outed to mount an 18" bed extension on the stand and make a leg to go from the end of the extension to the ground this will give me 400mm over the bed (more than I can handle at this time)>. I have a second banjo that will live on the extension the only problem is I need to extend the height of the banjo with an adaptor....... So Is there some one out there that could make the adaptor as per the atached drawing
Happy to pay just need the damed thing
Regards
Bowl BasherI can turn large lumps of wood into very small bowls
-
5th August 2010 09:16 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
7th August 2010, 04:57 PM #2Hewer of wood
- Join Date
- Jan 2002
- Location
- Melbourne, Aus.
- Age
- 71
- Posts
- 12,746
Perhaps repeat this post on the metal working section of the forum BB? There are lots of creative and generous members there.
Cheers, Ern
-
7th August 2010, 08:09 PM #3
Absent familiarity with Trend or Cougar, wouldn't a second tool rest with a taller post accomplish the same thing?
Cheers,
JoeOf course truth is stranger than fiction.
Fiction has to make sense. - Mark Twain
-
8th August 2010, 01:31 PM #4
You bet it would!!!!!!!!!
But I cant get one from the inporter and the outboard rig they sell is on the same level as the main bed they turn the head 90 and use an extension to the the tool post to come round the corner....
I want to turn the head 180 and the bed extension will be 230MM below the main bed and the weight will still be in line not over the side I will post picks when it is finished
Regards
Bowl BasherI can turn large lumps of wood into very small bowls
Similar Threads
-
outboard turning
By bedecaner in forum WOODTURNING - GENERALReplies: 5Last Post: 19th August 2007, 11:07 PM -
outboard turning
By turnerted in forum WOODTURNING - GENERALReplies: 2Last Post: 31st October 2006, 03:56 PM -
Outboard turning on jet 1642
By Grumpy John in forum WOODTURNING - GENERALReplies: 2Last Post: 29th August 2006, 10:21 AM -
Outboard turning on MC-900
By AdamJGS in forum WOODTURNING - GENERALReplies: 7Last Post: 12th November 2005, 01:00 AM -
Outboard Turning
By Rustic in forum WOODTURNING - GENERALReplies: 4Last Post: 8th November 2003, 04:12 PM