Thread: Painting Bowl Interiors

hi oj,
i understand your problem, but a photo would probably help
some cracks would not be hidden even with paint!
but if i where using paint i would be using an acrylic one!!
just my 2 bob's worth hope it helps
cheers smiife

If you were to use a dye then the crack will be highlighted.

I guess I should elaborate a little. I had a similar situation where the outside had a crack so I added one colour dye to the whole piece then epoxy to the crack. Sanded smooth the epoxy then another colour dye and sanded this out to lessen the second colour.

What I ended up with was two tones of colour for the one piece.

Have you considered not painting it but covering it. There is a metal foil flake product available in a variety of shades which look stunning.

No idea where you'd get it in Aus but it's an accessory to polymer clay - Metal Flake

Thanks for the advice and options guys.

I borrowed some of my wifes Atelier acrylic paint and put a couple of coats on the inside of the bowl. The next issue is how to seal it. I might use the artist varnish she has in her painting kit . . . but I'm also thinking I might just put a coat of Kunos on when I finish off oiling the outside. However before doing so, I'm intending to do a coupleof patches on a scrap piece of wood and see how the various alternatives work out before I finish the job.

OJJacaranda tourquoise2.JPGJacaranda tourquoise.JPG

I've put danish oil over acrylic with no problems so Kunos oil should be fine.
Ted

Thanks Ted - I'll go with that.

OJ