Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 9 of 9
-
24th March 2012, 10:54 AM #1
something different with a pen blank
had been playing around with a heap of these seam rippers in timber last year and since im going to a market in a few weeks time i decided to try using a few acrylic pen blanks instead of making pens to make some seam rippers ( no i didnt run out of pen kits that will NEVER happen )
not hard in making them just making sure to get the rippers to start with then getting a drill bit the right size then turning up a mandrel and hold it in a drill chuck or collect chuck ( my preferred method ) the first mandrel i used i made about 4 before it snapped the decided since the only other thing that was going to handle a little flexing when not supported with tail stock is to use one of the acrylic blanks finished to 12k the car polish then glued the cover in place
if anyone wants to see the process just let me know and i can post some pics
-
24th March 2012 10:54 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
24th March 2012, 02:05 PM #2
Looking good, hope they sell?
-
24th March 2012, 08:27 PM #3Senior Member
- Join Date
- Nov 2010
- Location
- Horsley, NSW
- Posts
- 395
would love to see the process. I havent had much luck with consistancy with my efforts on seem rippers. Where do you get your kits? They all look good
-
24th March 2012, 08:42 PM #4
-
24th March 2012, 08:53 PM #5
They look good Troy,
Have you made a closed end mandrell to hold them ?
Do you buy them as kits or just rob the parts off bought ones ?
-
24th March 2012, 08:59 PM #6
the kits are from the sewing supplies near the light at the mater on the nth side
and the mandrel is a pretty crude thing , it started out as a peice of corian that fitted down the hole but it snapped after a few so i decided to use a pen blank that i had a heap of and turned it down to a taper that it just needs a gentle tap to hold it on , tailstock used till turning and finishing the end every now and again its slips but a whack put its back
-
24th March 2012, 09:02 PM #7
-
25th March 2012, 10:58 AM #8
-
25th March 2012, 09:36 PM #9Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
Similar Threads
-
Pen Blank Scraps...........
By Les in Red Deer in forum WOODTURNING - PEN TURNINGReplies: 12Last Post: 9th February 2010, 07:54 AM -
different blank
By texx in forum WOODTURNING - PEN TURNINGReplies: 19Last Post: 2nd January 2010, 09:51 AM -
What is a pen blank
By footrot in forum WOODTURNING - PEN TURNINGReplies: 10Last Post: 16th December 2009, 08:54 PM -
My next pen blank
By NewLondon88 in forum WOODTURNING - PEN TURNINGReplies: 18Last Post: 29th August 2008, 10:11 AM -
a new blank for the uk
By colin gregg in forum WOODTURNING - PEN TURNINGReplies: 8Last Post: 17th August 2008, 12:19 AM