Needs Pictures: 0
Results 1 to 13 of 13
Thread: Pepper grinder and red gum bowl
-
31st March 2016, 04:06 PM #1Intermediate Member
- Join Date
- Jan 2016
- Location
- Melbourne
- Posts
- 41
Pepper grinder and red gum bowl
Here's the pepper grinder I promised my partner for Xmas - finally got it finished. I bought it as Tassie Blackwood, but later thought it might be Sassafras because of the smell - anyone keen to venture an opinion?
1pepper.jpg
It's about 45cm tall and the finish is french polish.
Here's a red gum bowl from a piece of wet wood that I cut in Dunkeld, South of the Grampians - wet turned, left to dry for a few months, and finished it with beeswax.
1bowl.jpg
The size is approx 20cm across.
Then there's the forthcoming attraction:
1pencils.jpg
-
31st March 2016 04:06 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
31st March 2016, 08:34 PM #2
Hi zeeber,
Both look good, is the base of the grinder a bit small
Forthcoming attraction.......you are going to draw us
a pretty picture in colourCheers smiife
-
1st April 2016, 10:55 AM #3Intermediate Member
- Join Date
- Jan 2016
- Location
- Melbourne
- Posts
- 41
The coloured pencils are all glued together...
-
1st April 2016, 10:56 AM #4Intermediate Member
- Join Date
- Jan 2016
- Location
- Melbourne
- Posts
- 41
The base of the grinder looks small because of the angle of the photo - sorry.
-
6th April 2016, 10:29 AM #5
I think the bowl is quite impressive just something that is so appealing for me.
Just a question on the upcoming project and I am second guessing it a little that you will turn this on the lathe. Do you think CA would be strong enough for the forces involved on the lathe? My thinking would be to use either epoxy or regular wood glue and also sand off/back the colour where the glue is applied.
-
6th April 2016, 11:46 AM #6Intermediate Member
- Join Date
- Jan 2016
- Location
- Melbourne
- Posts
- 41
Christos, I have turned the outside of the courwd pencil bowl and all pencils are still attached. It seems the CA glue worked well enough, but I have to add that I used a lot! When each row was finished, I pourwd more glue in the grooves, and it seems to have done the trick. I'm working on a way to hold the flat bottomed bowl on the chuck - a variation of a design I saw withe the bowl held between two pieces of mdf with holes in them and the two bolted together. Will post a pic when it's done.
-
13th April 2016, 11:01 AM #7Senior Member
- Join Date
- Aug 2012
- Location
- Caringbah, NSW
- Age
- 81
- Posts
- 386
C'mon Zeeber, hurry up ! The suspenders are killing me !
Can't wait for some colour in my life..
-
18th April 2016, 08:47 AM #8Intermediate Member
- Join Date
- Jan 2016
- Location
- Melbourne
- Posts
- 41
Ok, Gary H - I'll put you out of your misery. Here are the pictures of the bowl - unfortunately the colours blend into the wood when sanding, so not the result I was hoping for:
P1050295.JPGP1050296.JPGP1050297.JPG
-
18th April 2016, 01:09 PM #9Senior Member
- Join Date
- Aug 2012
- Location
- Caringbah, NSW
- Age
- 81
- Posts
- 386
Thanks, you've made my day ! Congratulations on a job well done. Now all I have to do is steal my grandkids' pencils without getting caught. Or maybe if I used coloured chalk I wouldn't have to sharpen the chisels. So what's the next project
Gary
-
18th April 2016, 01:22 PM #10Intermediate Member
- Join Date
- Jan 2016
- Location
- Melbourne
- Posts
- 41
Something like this but from red gum. I picked up a lot of gum fence posts, so now I can do lots of smaller diameter items like pepper mills, shakers and the like:
image.jpg
-
18th April 2016, 02:39 PM #11
-
19th April 2016, 09:00 AM #12Intermediate Member
- Join Date
- Jan 2016
- Location
- Melbourne
- Posts
- 41
Strangely, no - it gives quite a clean cut, except where you go through a pencil to the other side. Best to keep the bottom flat so you don't have any long thin slivers of pencil ends. You can see it in the bottom of the bowl in the photo. I shouldn't have sanded it, but to remount now is just too difficult.
-
21st April 2016, 11:25 PM #13
A friend of mine sent me a this picture and asked if I could make one. I doubt it, but it is a very cool idea I reckon.
Good job on your bowl.The fact remains, that 97% of all statistics are made up, yet 87% of the population think they are real.
Similar Threads
-
Pepper grinder
By ndp_2010 in forum WOODTURNING - GENERALReplies: 8Last Post: 7th December 2013, 02:57 AM -
Pepper grinder.
By tea lady in forum WOODTURNING - GENERALReplies: 11Last Post: 30th January 2013, 06:26 PM -
Pepper Grinder
By gawdelpus in forum WOODTURNING - GENERALReplies: 10Last Post: 6th May 2012, 08:16 PM -
Pepper grinder
By gawdelpus in forum WOODTURNING - GENERALReplies: 8Last Post: 31st December 2010, 07:21 PM -
First Pepper Grinder
By gawdelpus in forum WOODTURNING - GENERALReplies: 13Last Post: 10th November 2010, 01:37 PM