Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: Pin Chuck
-
19th May 2017, 01:07 PM #1Intermediate Member
- Join Date
- Feb 2013
- Location
- Hervey Bay, Queensland
- Posts
- 36
Pin Chuck
This idea seems to be little known these days. I guess being a mature aged person sometimes helps. You just have to remember the details.
When I am making my bud vases, I have had a problem rechucking it after parting off. Obviously I cannot grip the smaller end without damaging it.
I vaguely remembered a type of chuck that would do this but could not remember the name.
I knew vaguely that it was a rod of a certain diameter with a flat on it and a small rod the diameter of which equalled the depth of the flat. Placing them in a drilled hole, they locked together when the item was rotated.
This morning, the memory kicked in and I remembered it was a pin chuck.
Out to the shed to make one and it worked perfectly. I can now re turn the base concave, decorate it and sand smooth and polish.
I mention this in case anyone out there has a need for a similar item.
Here is a link to a video of the chuck. https://www.youtube.com/watch?v=Odu1cT3AwUE
-
19th May 2017 01:07 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
20th May 2017, 02:10 PM #2Intermediate Member
- Join Date
- Feb 2013
- Location
- Hervey Bay, Queensland
- Posts
- 36
Pin Chuck
Hi Folks
Two pics of a bud vase I just made. It was made from laminated parquet flooring strips. (Oak)
With the pin chuck I was able to reverse it after parting off and then work on the bottom.
Gave it a concave base and then a few concentric grooves for decoration.
Don't think I will bother using the parquet strips for this again, bit dissapointed in it.
You don't know until you try it.
DSC_8115.JPGDSC_8114.JPG
Similar Threads
-
collets : to chuck or not to chuck
By steamingbill in forum METALWORK FORUMReplies: 4Last Post: 26th July 2014, 10:17 PM -
removing chuck insert from vicmarc chuck
By doug3030 in forum WOODTURNING - GENERALReplies: 10Last Post: 25th April 2012, 02:10 PM -
Which beginners chuck should a woodchuck chuck
By dazzler in forum WOODTURNING - GENERALReplies: 16Last Post: 2nd July 2006, 10:58 PM -
New Chuck
By macca2 in forum WOODTURNING - GENERALReplies: 11Last Post: 7th May 2005, 05:29 PM