Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: PLease help
-
30th August 2007, 11:01 AM #1New Member
- Join Date
- Aug 2007
- Location
- NJ
- Posts
- 3
PLease help
Hello all I am new to these forums and faily new to woodworking. I was wondering if you all could help me with a question that i have. I have a small one way table top lathe and would like to upgrade. Some of the larger lathes that i am looking at have a REVERSE on them. Can anyone tell me what good reverse is on a lathe and would you recomend a new lathe that has it or not. Please any help would be wonderful.
Thank you in advance
Paul Anderson
NJ Shore USA
I have a Jet Mini vareible speed lathe.
-
30th August 2007 11:01 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
30th August 2007, 11:15 AM #2GOLD MEMBER
- Join Date
- Oct 2002
- Location
- NSW
- Posts
- 1,610
Some folks like to reverse the direction when they change a grit when sanding - they feel it helps to get a slightly better finish.
Also, when hollowing, if the head doesn't swivel, running the lathe in reverse allows you to turn without having to lean across the lathe bed.
My lathe doesn't have a reverse, and I've never tried one which does.
If the lathe does have a reverse, make sure any chucks you use have some extra safety device so that they don't unscrew when the lathe reverses!
Cheers,
Andrew
-
30th August 2007, 11:26 AM #3
Hi Paul and welcome
I am still learning my self and this is the best place to learn
What type of lathe is it you have
I have a Jet Mini vareible speed which I recently found can have an addaption fitted to switch it to operate in reverse http://www.gulfcoastwoodturners.org/...ni%20Lathe.pdf
.
-
30th August 2007, 11:50 AM #4
the new nova 16-24/44 (i think there the right number) They have reverse spin head it great lathe. I love mine very much
bye Toni
-
30th August 2007, 04:13 PM #5BANNED AT OWN REQUEST
- Join Date
- Jun 2007
- Posts
- 115
Reverse is OK!
Hi anderspv,
Is my believe that any lathe with a reverse option, is a good thing. There are many reasons why (some already mentioned), I'm certain you will find some applications for it, yourself.
lubbing5cherubs-"the new nova 16-24/44 (i think there the right number) They have reverse spin head it great lathe. I love mine very much bye Toni"
I can understand why you love your 1624-44 so much, I got one myself!
Cheers
GV