Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
-
24th July 2004, 07:37 PM #121 with 26 years experience
- Join Date
- May 2004
- Location
- Sunshine Coast Queensland
- Age
- 53
- Posts
- 1,402
Found - New Railway Sleepers in Perth
Hei Guys,
If anyone is after a new railway sleeper to cut up for turning blanks Soils ain't Soils in Bibra Lake has them - size is 2200mm x 200mm x 100mm @ $30 for A grade.
Cheers
Smidsy
-
24th July 2004 07:37 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
24th July 2004, 07:58 PM #2
Have you used one yet? If so, how did it look? I would be concerned that there would be splitting and or rot through the wood.
Cheers,
Sean
-
24th July 2004, 08:05 PM #321 with 26 years experience
- Join Date
- May 2004
- Location
- Sunshine Coast Queensland
- Age
- 53
- Posts
- 1,402
I cut three 200mm pieces off the sleeper and it seems free of rot and splits.
I've started turning one peice and it's coming up ok considering you have a novice turner and (probably) a blunt roughing gouge - it can't be that bad because I was getting nice shaped chips off it.
I'll post a pic tommorrow.
Cheers
Smidsy
-
24th July 2004, 08:16 PM #4
new as in unused? what wood?
-
24th July 2004, 08:22 PM #521 with 26 years experience
- Join Date
- May 2004
- Location
- Sunshine Coast Queensland
- Age
- 53
- Posts
- 1,402
Hei Joe,
New as in unused, untreated nice fresh Jarrah - I got a good one, he had two packs there and some look fairly rough but there were a few that looked good.
He says he has a source and gets them regulalry.
Cheers
Smidsy
-
25th July 2004, 01:54 PM #6
If sleepers there are anything like here, they will be green as the day they were cut.
DanIs there anything easier done than said?- Stacky. The bottom pub, Cobram.
-
25th July 2004, 03:02 PM #7
Cool, thanks Smidsy.
-
25th July 2004, 04:01 PM #821 with 26 years experience
- Join Date
- May 2004
- Location
- Sunshine Coast Queensland
- Age
- 53
- Posts
- 1,402
Hei Guys,
I've just put two pics in the woodwork pics area.
Cheers
Smidsy