Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Re Pomanders for Christmas
-
10th November 2011, 06:17 AM #1Novice
- Join Date
- Aug 2011
- Location
- Manchester UK
- Posts
- 16
Re Pomanders for Christmas
OK so it may have taken me some time, I work away from home a lot, but I’ve finally finished the pomanders. They are not quite the same as the drawings strangely I had the same failure on both.
It’s been that long that since I started them that I’m not sure how many of you will remember the original thread. But here they are anyway.
Cheers..... Keith.
-
10th November 2011 06:17 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
10th November 2011, 06:40 AM #2
No question, lot's of hard work gone into them.
Is the internal lamp and LED or small incandescent.
Also how do you do the pierced work, it it all drilled out then files for the stars or do you use a dental drill. I think it's far to tidy to be done by a mini-drill with burrs.
Dragonfly
No-one suspects the dragonfly!
-
10th November 2011, 07:27 AM #3Novice
- Join Date
- Aug 2011
- Location
- Manchester UK
- Posts
- 16
Is the internal lamp and LED or small incandescent.
The lights inside are Christmas tree LED lights that have several pulse patterns this gives different glow effects when they are all so close together
Also how do you do the pierced work, is it all drilled out then files for the stars or do you use a dental drill. I think it's far to tidy to be done by a mini-drill with burrs.
It’s all drilled out first and then the holes are opened up / joined together with small files.
-
10th November 2011, 07:24 PM #4
Nice work
what was the failure?regards
Nick
veni, vidi, tornavi
Without wood it's just ...
-
10th November 2011, 07:44 PM #5Novice
- Join Date
- Aug 2011
- Location
- Manchester UK
- Posts
- 16
Hi Sawdust Maker
The problem I had on both of them was in trying to make the double frill at the top of the stem. Both of them failed on the outer frill whilst cutting the underside of the inner frill. So I had to change the design slightly and put the double frill at the base of the stem. If you can find the original thread I put up a drawing to show what I was aiming at.
I’m thinking of turning caps with an ornate finial just to finish them off.
Cheers.... Keith
Similar Threads
-
Christmas joy
By jmk89 in forum HAND TOOLS - UNPOWEREDReplies: 10Last Post: 30th December 2009, 10:55 AM -
Merry Christmas to Me....Merry Christmas to Me-Part 1
By mlsa in forum BOX MAKINGReplies: 11Last Post: 24th December 2006, 07:34 PM -
Christmas
By Dangermouse in forum WOODIES JOKESReplies: 1Last Post: 10th December 2006, 03:40 PM -
Our Christmas - Let's see you top this one
By Neil in forum ANNOUNCEMENTSReplies: 31Last Post: 20th January 2004, 08:32 AM