Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 19
Thread: river oak
-
18th April 2010, 04:24 PM #1GOLD MEMBER
- Join Date
- Sep 2008
- Location
- texas, queensland
- Posts
- 1,239
river oak
had a good score today .the power mob were cutting down trees on the river bank around the power boxes and transformer that run our pumps on the farm this morning when i turned up to start bailing hay they were already into it .
so i went and had a yarn see what they were going to cut or just prune , turned out that 3 river oaks had to go ,one was a ripper so i asked them not to run it through the chipper but leave the best trunk on the river bank and i would collect it when i finished with the hay .
pictured is the resulting load , i worked harder in the hour it took to cut these up and load them onto the ute than i did all morning bailing.
so far i have only docked them to length and split them down the middle i am about to paint the ends with moblicer .
i had no luck with the last one of these i got because it had been fallen for a year or so before i got it .
what else should i do to try and get the most out of this stuff while it dries .
P.S. by the way those blocks are bl**dy heavy in the green state.'If the enemy is in range, so are you.'
-
18th April 2010 04:24 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
18th April 2010, 04:31 PM #2
Great score Texx.
-
18th April 2010, 04:48 PM #3Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
Sweet Texx!!
I can just imagine the grain in some f those branch forks.
-
18th April 2010, 05:21 PM #4
nice sore
happy turning
Patrick
-
18th April 2010, 05:24 PM #5
Wow thats nice grain it would look great bookmarked.
-
18th April 2010, 05:25 PM #6
That is some great looking wood. Suggest you rough turn and seal as many bowls as possible as soon as possible. If your oak is anything like ours you might want to spray the lathe bed with oil and cover that with plastic before turning wet oak. Others will probably follow here with better advice.
Richard in Wimberley
-
18th April 2010, 06:45 PM #7
Really good score there Texx
I'd be roughing out some bowls and then cutting the rest down for handles, pepper grinder blanks etc - ie 75, 60, & 50 mm slices etc and wax the lot. Much easier to cut when it is wet, dam hard and full of silica when dry. After drying they can be cut down further as required.Neil____________________________________________Every day presents an opportunity to learn something new
-
18th April 2010, 07:12 PM #8
Nice score Tex
I think you have too much wood, so I'm going to have to visitregards
Nick
veni, vidi, tornavi
Without wood it's just ...
-
18th April 2010, 07:31 PM #9Hewer of wood
- Join Date
- Jan 2002
- Location
- Melbourne, Aus.
- Age
- 71
- Posts
- 12,746
Nice haul Texx.
My two bob's worth is to take out the pith when you're dividing the logs.
Yeah, not all that easy when you're under the pump but it's easier to do it with a whole log than with a half log, and lots of mischief starts from the pith if you leave it til later.
So are there other names for River Oak?Cheers, Ern
-
18th April 2010, 07:54 PM #10
nice score, have heard that its pretty hard to dry and loves to split. Best of luck with them though
I have two in my garden but they have only been in for a bit over a yearIt's only a mistake if you don't learn from it.
-
18th April 2010, 07:54 PM #11Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
-
18th April 2010, 08:03 PM #12GOLD MEMBER
- Join Date
- Sep 2008
- Location
- texas, queensland
- Posts
- 1,239
-
18th April 2010, 08:31 PM #13
The River Oak.
Hi Texx,
My $'s worth is to work out which way it was growing, & turn it upside down, & the water will just run out of its own accord. I would also lay it up against a North East Wall somewhere, so as the UV Rays kind of pass over the wood as that appears to be one reasons why wood splits.
Wouldn't leave it to long before you would use the Mobilcer.
A lot of Turners usually just mix up really old paint & use that.
Have you had the Mobilcer long & what may have been the price.
If it is anything like English Oak , then you are going to have a great time with it.
Regards,
issatree.
<input id="gwProxy" type="hidden"><!--Session data--><input onclick="jsCall();" id="jsProxy" type="hidden"><input id="gwProxy" type="hidden"><!--Session data--><input onclick="jsCall();" id="jsProxy" type="hidden"><input id="gwProxy" type="hidden"><!--Session data--><input onclick="jsCall();" id="jsProxy" type="hidden">
-
18th April 2010, 08:52 PM #14GOLD MEMBER
- Join Date
- Sep 2008
- Location
- texas, queensland
- Posts
- 1,239
i have had the mobilicer about 6 months and i got it for nix on the condition that the guy i got it from can use some if he needs to < ( but i am pretty sure he wont ) he had it for years he was the local mobil depot owner and he got it to seal the ends of a few sleepers and never used it again after he did that job.
on the wax sealing thing i have only done it only once before on some olive wood i think it was and half the wax lifted off in sheets of its own accord a few days after dipping it , anyone shed any light on why that happens ,'\
its a mix of bee's wax with just a little bit of parrafin wax melted in with it .'If the enemy is in range, so are you.'
-
18th April 2010, 09:10 PM #15
So you'll be dropping some of that at my place right?
Similar Threads
-
River red gum
By Ron Booth in forum RESTORATIONReplies: 4Last Post: 20th February 2009, 04:10 PM -
River red gum
By Shedhand in forum TIMBERReplies: 30Last Post: 15th August 2007, 01:37 AM -
Do you know anything about River oak ?
By JDarvall in forum TIMBERReplies: 16Last Post: 16th June 2007, 11:05 AM -
The River
By Baz in forum WOODIES JOKESReplies: 0Last Post: 23rd July 2004, 09:05 PM