Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 14 of 14
-
23rd January 2015, 08:42 PM #1Intermediate Member
- Join Date
- Dec 2012
- Location
- Devonport Tasmania
- Posts
- 35
Can I sharpen lathe tools on this disc?
Hi all I'm new to turning having borrowed a cheap lathe from a mate and I've just bluntened my first gouge and then thought "how the hell do I sharpen this??" I don't have a grinder but there is a disc attachment on the lathe. Is that good for sharpening tools?
Should I glue a hook and loop kit onto it? Or just glue sandpaper to the disc? Do I need metal sanding sandpaper? Is 120 about right? Do I need a jig?
Thanks John.
-
23rd January 2015 08:42 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
23rd January 2015, 10:03 PM #2
Yes you can, but as a beginner, not sure that I would. With just a table, not jigs nor experience, you might make a mess of it and end up with a short blunt tool. If you do, get some crap steel to practice on before subjecting you chisels to it.
Neil____________________________________________Every day presents an opportunity to learn something new
-
24th January 2015, 07:32 AM #3
John, with sharpening, wot Neil says is right.
Do yourself a favour and slide a lenght of 3/4" (19mm) ply thru the channel under the bed of the lathe. This will strengthen the entire frame of the lathe and reduce some of the flex. I started on this style of lathe, a little while ago.
Find a club or a friendly turner in your area and learn from them. Learning from books (in my case) or even the plethora of "instructional" videos on youtube is the hard way.Pat
Work is a necessary evil to be avoided. Mark Twain
-
25th January 2015, 05:41 PM #4Retired
- Join Date
- May 2012
- Location
- Canberra
- Posts
- 1,820
Geet a cheap grinder
Grab a second hand grinder like this one: http://www.gumtree.com.au/s-ad/newnh...der/1067860894
New wheels are available from a car store like Super-Cheap. There is a little to learn here, but the issue of grinders and wheels are well written about in other threads.... but this $10 grinder will save you a LOT of monetary pain.
It'll get you going very quickly plus if the turning bug doesnt bite you can sell it for more than you paid.
-
25th January 2015, 06:58 PM #5Intermediate Member
- Join Date
- Dec 2012
- Location
- Devonport Tasmania
- Posts
- 35
Ok so the bench grinder is better than the disc on the lathe?
-
25th January 2015, 07:12 PM #6
So the real question is "did you have a great time whilst bluntening the tool?"
If so get a grinder and a jig to help you sharpen consistently
also get a mentor as Pat suggests
and welcome to the addictionregards
Nick
veni, vidi, tornavi
Without wood it's just ...
-
25th January 2015, 09:37 PM #7.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,795
For newb I reckon the disc might be a better way to go.
The Grinder is single high speed while the speed of the disc can be varied to suit PLUS the grinding speed can be varied by changing the position on the disc.
Grinders are useful if you want hollow grinding but that is not needed on turning tools.
-
25th January 2015, 10:59 PM #8Intermediate Member
- Join Date
- Dec 2012
- Location
- Devonport Tasmania
- Posts
- 35
-
26th January 2015, 12:44 AM #9Retired
- Join Date
- May 2012
- Location
- Canberra
- Posts
- 1,820
and so the Great Accumulation begins.....
Accelerant: http://www.cwsonline.com.au/shop/cat...ot-stuff-glues
BTW, Jims site is pure evil. It has made me a much poorer man
The other backing pads (get velcro) and disks can be obtained from http://www.veneerinlay.com.au/127-23...iscs-hook-loop and http://www.thesandpaperman.com.au/230-mm-dia-no-hole/ . Obviously these links/businesses aren't the last answer to your problem, but all 3 businesses have served me very well over the last few years and you'll get the disks you need ASAP. The advertisers on the right are VERY well worth familiarising yourself with too. Better decisions can be made later on in the gig.
Eventually, you will end up with a grinder, so keep one eye on that. Only so much sharpening can be done on paper (though its damn convenient to have it to the left of the lathe and often makes me wonder why I dont mount my 180 grit CBN wheel there...... getting a tad blunt? leeeaaannn left, zing zing, right to go!... seems so sensible to me)
-
26th January 2015, 07:54 AM #10
-
26th January 2015, 11:08 AM #11
+1
+1
But, until you can acquire a separate grinder it will get you underway, especially if you are just spindle turning and only using a roughing gouge, spindle gouges, skews and parting tool. Bowl gouges would be more of a problem.
My concern is the platform, which I would find too large to manoeuvre the tool to the desired grind profile. Perhaps rig up a smaller platform that sits on the existing one.
May turners are satisfied with 80 grit grinds.Stay sharp and stay safe!
Neil
-
26th January 2015, 09:34 PM #12
tear out
having a look at your reel seat spacer you seem to be turning uphill
I've taken the liberty of putting a couple of arrows on your picture
if you use your chisel downhill as the (poorly drawn) arrows show you will likely get less tear out
essentially cut with the grain not against it
reel spacer.jpg
I'll show you the straw analogy that I've heard from a couple of people
wood has a lot of capillaries running up the trunk taking moisture etc to the leaves etc
imagine these capillaries are like a bunch of straws (eg magnified heaps)
so from the piccy below the orange arrow is cutting against the capillaries and is likely to cause splintering or tear out
the blue arrow is cutting with the grain and is slicing the straws/capillaries and is a cutting action less likely to cause splintering/tear out
straws.jpg
hope this makes senseregards
Nick
veni, vidi, tornavi
Without wood it's just ...
-
27th January 2015, 07:56 AM #13Intermediate Member
- Join Date
- Dec 2012
- Location
- Devonport Tasmania
- Posts
- 35
Makes sense I think. I used a roughing gouge and cut both ways then I used the skew to smooth it. I do find it easier to cut right to left because I have more control. Would this be ok when roughing the blank round then cutting left to right to turn the piece to final shape?
-
27th January 2015, 07:59 AM #14Intermediate Member
- Join Date
- Dec 2012
- Location
- Devonport Tasmania
- Posts
- 35
Similar Threads
-
How to Sharpen a Plane Blade Part 3: How to sharpen the front side freehanded.
By soatoz in forum JAPANESE HAND TOOLSReplies: 6Last Post: 16th May 2009, 08:46 AM -
How often do yous sharpen your tools?
By BoomerangInfo in forum WOODTURNING - PEN TURNINGReplies: 13Last Post: 1st February 2009, 06:58 AM -
How to Sharpen a Plane Blade Part2: How to sharpen the front side.
By soatoz in forum JAPANESE HAND TOOLSReplies: 6Last Post: 24th March 2007, 01:01 PM -
how do you sharpen ring tools
By rocabig in forum WOODTURNING - GENERALReplies: 10Last Post: 26th October 2005, 05:34 PM -
How Do You Sharpen Your Tools?
By silentC in forum POLLSReplies: 64Last Post: 11th May 2005, 05:54 PM