Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 18
Thread: Shepparton Wood Show
-
2nd March 2014, 12:29 PM #1
Shepparton Wood Show
Next weekend or the Labour Day weekend is the Shepparton Wood SHow. Saturday 8th and Sunday 9th March. I reckon its the best regional (Vic) wood show. Well worth the visit.
I'll be there doing demos and with a small shop. Carrolls is also a regular.
Here is a link to a video I did of last year's event: https://www.youtube.com/watch?v=hYfpyaQ7jok
Hope to see you there.
-
2nd March 2014 12:29 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
2nd March 2014, 01:00 PM #2
Good Video there Brendan, I watched it all the way through. I don't think we have anything like that in WA, if only I had some time, can't wait to retire.
Willy
Jarrahland
-
2nd March 2014, 01:22 PM #3GOLD MEMBER
- Join Date
- Oct 2004
- Location
- Melbourne, Australia.
- Posts
- 1,273
I agree a good video of the event, I like that you didn't labour over one person and their craft, but gave each person a minimum amount of time to display their craft and/or product, then moved on, short and sweet.
I haven't been to that show and probably cannot make it this year, but I'm assuming it is similar to the Ballarat one, which I'm assuming you probably have attended as you live relatively close by.
Mick.
-
3rd March 2014, 01:06 PM #4
The Shepparton club put on a very good show and get the whole club involved.
There will be about 50 demostrations going on over the weekend, which takes a fair while to get around, they cater for both mum and dad so each is busy for the time they are there.
The club put in a great effort and this is reciprocated by the community as they come in large numbers.
Many travel for a couple of hours to get to this show as they know they will not be dissapointed.
We will be there as brendan indicated, a must not miss weekend on our travels.Jim Carroll
One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!
-
9th March 2014, 08:33 AM #5Member
- Join Date
- Apr 2010
- Location
- clayton
- Posts
- 58
a good day
Hi team, Swmbo and I spent an enjoyable Saturday at the Shepparton wood show. Plenty going on. Eildon Woodturners had two lathes going nearly continuously plus some good special on tools. Brendan Stemp did some great Demos including one especially for my partner and I plus a few onlookers. I don't remember all the names, sorry, but it was an entertaining as well as informative day. Well worth the drive from Melbourne. Jay
-
9th March 2014, 08:50 PM #6GOLD MEMBER
- Join Date
- Oct 2004
- Location
- Melbourne, Australia.
- Posts
- 1,273
As things panned out, my brother and I drove up on Saturday, had a very enjoyable time, stayed to stumps.
Mick.
-
10th March 2014, 07:13 AM #7
Any candid shots?
-
10th March 2014, 09:22 PM #8GOLD MEMBER
- Join Date
- Oct 2004
- Location
- Melbourne, Australia.
- Posts
- 1,273
Sorry, no pictures, didn't take a single one all day, too busy taking it all in.
Mick.
-
11th March 2014, 10:44 PM #9
I put this same reply on another post where this show was advertised.
(Sunday) Just got back, and what a fantastic show they put on. So many demonstrations, displays, and sales in an enormous auditorium.
Had a great evening last night, as I was invited back to their clubrooms for a barbeque tea with their members and demonstrators etc, and got a tour of their workshop facilities. What a great asset they have, and they make very good use of it.
If you didn't get there this time, watch out for next year's event and try to make it, you won't be sorry.
I too did not get any photos which was a shame, as I am trying to remember all the demonstrations that were on, and where they were.
If anyone had a layout of the show that I could get a copy of, it would be much appreciated.Dallas
-
12th March 2014, 12:23 AM #10
That Great Show.
Hi All,
Well, I haven't been to Shepp for many years, & was not disappointed.
I to did not get any photos.
Ran into a lot of Old Friends that I have not seen for quite awhile.
Saw a Bowl, a bit bigger than what Brendan does, " Gutter " was a bit wider & had Green Gum Leaves in it, Very Impressive.
Len was doing some fine Bread Boards, & there so many other Demo's going on.
Didn't even get to say Hello to Irene & Jim, as they were so busy.
We all should have had Our WW F ID's on, as it seems I missed them, but knew a few.Regards,
issatree.
Have Lathe, Wood Travel.
-
12th March 2014, 10:05 AM #11
Goulburn Valley Woodworkers show 2014
Here is some photos on our facebook page
https://www.facebook.com/permalink.p...5¬if_t=likeJim Carroll
One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!
-
12th March 2014, 04:11 PM #12GOLD MEMBER
- Join Date
- Jun 2006
- Location
- Burwood NSW
- Age
- 82
- Posts
- 1,247
Some good pictures there Jim. Must have been a great show.
Do you know what the things are just to the right in the photo showing the pierced balls?
Ted
-
12th March 2014, 05:50 PM #13Jim Carroll
One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!
-
12th March 2014, 07:24 PM #14
That's what I was told they were if this is what you are referring to.
Roll holders.JPG
-
13th March 2014, 03:56 PM #15GOLD MEMBER
- Join Date
- Jun 2006
- Location
- Burwood NSW
- Age
- 82
- Posts
- 1,247
Now I know what they are, I can see a paper towl roll on one at the back.A design I havn't seen before.
Ted
Similar Threads
-
Wood show - show us your score
By bassmansimon in forum TIMBER & WORKING WITH WOOD SHOWSReplies: 35Last Post: 31st July 2013, 02:59 PM -
Shepparton Wood Show
By brendan stemp in forum WOODTURNING - GENERALReplies: 10Last Post: 17th March 2010, 08:13 AM -
Sydney Wood Show Vs Canberra Show
By I_wanna_Shed in forum WOODWORK - GENERALReplies: 8Last Post: 10th April 2006, 06:16 PM