Thread: Sherwood EBAS350 Band Saw

From my exploration previously (I don't own one so it was a while ago and not too deep) I'm pretty sure its the same as the other BAS350's that the likes of hafco/ctec produced. You'll have a decent chance of finding docs for those.

Thanks Poundy I'll have a look there.

https://www.timbecon.com.au/theme/ti...ls/BAS-350.pdf

rick

That's the one! Thanks heaps Rick.

Originally Posted by doragus

That's the one! Thanks heaps Rick.

No problems

you get it for a good price? i like it when you get a bargain and its cheap to fix up.

Originally Posted by brainstrust

you get it for a good price? i like it when you get a bargain and its cheap to fix up.

Yes and it only needed a clean up, new blade and new guide bearings.

Hey doragus did you replace just the actual bearings or the entire guide? I bought one of these secondhand and the upper and lower guide is some crap metal and they have both broken. Am after options for repair.

I was lucky mate. Only had to replace the bearings as the guide assemblies were fine. I don't know if the current Sherwood saws would have compatible guide assemblies but it might be worth a call to Timbecon 1300 880 996. Good luck.

Originally Posted by doragus

I just picked up an older model Sherwood EBAS350 band saw. Not sure what year model. Excellent condition and only lightly used. Replacing blade and gude bearings. Anyone have any experience with this saw and, in particular, anyone have access to a user manual? Welcome any advice as this is my first band saw.

I have a brand new set of bearings and adjustment blocks (top and bottom) that suit the sherwood 14" plus model https://www.timbecon.com.au/sherwood-14in-plus-bandsaw

I got them with the idea of upgrading my sherwood 14" standard but it didn't work out

pm if you are interested or have queries

cheers
Hodgo

damn

just saw the date on this post

any other takers?

Hodgo