Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 24
-
17th February 2012, 05:11 PM #1Member
- Join Date
- Mar 2007
- Location
- Tucson AZ
- Posts
- 81
A sneak peek into my segmented twisted mind
This will be one of 10 to 16 windows in the feature ring of my most insane segmented attempt. This one piece alone had 590 individual pieces of wood. With the additional upper and lower rings, the feature ring alone should exceed 10,000 pieces. This doesn't include the rest of the vessel. I don't even have a lathe big enough to turn it yet but I'm making it anyway. I must be nutz. C&C are welcome.
-
17th February 2012 05:11 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
17th February 2012, 06:38 PM #2Retired
- Join Date
- May 1999
- Location
- Tooradin,Victoria,Australia
- Age
- 73
- Posts
- 11,918
You are sillier than me. I have a couple of lathes that would be big enough if you want to come over here.
-
17th February 2012, 06:55 PM #3Member
- Join Date
- Mar 2007
- Location
- Tucson AZ
- Posts
- 81
If you were in Tucson I'd take you up on that. If everything goes the way I hope though, I'll have a lathe big enough to turn it by the time it's ready to go on it. I estimate it to be about 20 to 22 inches in diameter if I do it with 14 of these.
-
17th February 2012, 07:25 PM #4
Only you can currently envisage the final piece but if that small segment is anything to go by it will be stunning.
What lathe are you after, if we can ask?Dragonfly
No-one suspects the dragonfly!
-
17th February 2012, 08:57 PM #5
Well, this will obviously be one to watch. Please keep it well documented Bill. Will it be a platter-type form?
WayneDon't Just Do It.... Do It HardenFast!!
Regards - Wayne
-
17th February 2012, 09:11 PM #6
As for Robb's comment his shavings are big enough for most peoples pen blanks
-
17th February 2012, 09:19 PM #7
A superb design. I look forward to seeing it come together. I have no idea how you get all those intricate patterns.
-
17th February 2012, 09:52 PM #8
Bill, that is absolutely beautiful. I will be watching with keen interest.
JimSometimes in the daily challenges that life gives us, we miss what is really important...
-
19th February 2012, 07:05 PM #9Senior Member
- Join Date
- Dec 2007
- Location
- Melbourne Australia
- Posts
- 230
An amazing piece of work, but the term "too much time on one's hands" springs to mind.
-
21st February 2012, 04:47 AM #10Member
- Join Date
- Mar 2007
- Location
- Tucson AZ
- Posts
- 81
Thanks everyone. Actually the term never enough time comes to my mind. LMAO. I own my Car Audio business and work 50 hrs a week there. I'm building an 8'x11' entertainment center, Making a staved turning for a gift, building a humidor and then I threw this into the mix for a contest I'm in for segmented feature rings. I don't even know how I find the time to do this stuff. Oh well, you know what they say "Idle minds are the work of the devil" No time to idle here.
-
21st February 2012, 11:47 AM #11
As said will be watching this as well.
-
21st February 2012, 02:37 PM #12Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
A stunning design Bill!!
By the looke of your list of projects and the complexity of that design, I will concede that your segmented twisted mind is much more orderly than my cluttered arrangement!!
-
22nd February 2012, 12:10 PM #13Member
- Join Date
- Mar 2007
- Location
- Tucson AZ
- Posts
- 81
My friend, my messes make messes on top of the mess from the last mess made. I try desperately to clean my shop but goblins come in when I'm not there and throw stuff everywhere, steal my pencils and hide my tape measures. I try to follow the rule of picking up 10 things every time I leave the shop. Problem is, i use 30 things if I even open the door.
Actually my biggest problem is my shop is way too small for all the tools. So take out a few things, toss some saw dust off the lathe and the place is trashed again. I'd almosrt have to clean every 15 minutes. Sooo, I have a twisted mind and a cluttered arrangement. A phoenix will rise from the ashes.
-
23rd February 2012, 12:07 AM #14
-
23rd February 2012, 03:23 AM #15Member
- Join Date
- Mar 2007
- Location
- Tucson AZ
- Posts
- 81
You're killin me LMAO. I've decided to make it 12 features. The ring will be somewhere in the 26" diameter range. The delima is that my lathe only has 14" capacity. I'm working on getting a new lathe but Idon't want to jinx myself so I can't say what it will be just yet. More on that soon I hope.
Similar Threads
-
A Sneak Peak
By Nai84 in forum WOODTURNING - PEN TURNINGReplies: 6Last Post: 24th November 2011, 05:13 PM -
Sneak Preview
By NewLondon88 in forum WOODTURNING - PEN TURNINGReplies: 7Last Post: 12th March 2010, 08:45 PM -
Sneak Peek - 1st of run
By MajorPanic in forum WOODWORK PICSReplies: 51Last Post: 22nd October 2006, 05:07 PM -
Sneak Peek
By Lin in forum SCROLLERS FORUMReplies: 5Last Post: 29th June 2006, 03:22 PM -
Have a peek
By Finger Dicer in forum WOODWORK PICSReplies: 8Last Post: 29th April 2005, 05:15 PM