Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 10 of 10
Thread: Sorby hollower tip
-
20th January 2007, 12:48 AM #1
Sorby hollower tip
I have the Sorby hollower (RS200 or something I think!!), and the bolts that hold the cutters on were getting a bit sloppy on the allen key from over-use. I don't know what thread they are bit it's an odd one and I couldn't got any replacements locally or from the supplier who was waiting on MIK for them. Even the allen key was an odd size that I had to make my own T-bar to fit. Because the screws appeared to have the same number of threads per inch as M5 but a smaller diameter, after a bit of umming and ahhing, I bit the bullet and ran a 5mm tap through the tool. Should have done it years ago! Very easy cutting and left a very tidy M5 thread. M5 screws fit through the cutters with no mods and thankfully have 3mm allen heads. Now I only have to have one 3mm T-bar around as everything else including the screws that hold my chuck jaws on is 3mm allen head too.
-
20th January 2007 12:48 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
20th January 2007, 01:11 AM #2
Good on yer )
i wonder who has some recipes for printing inks (the computer printer). Hmm i wonder if they would be ok on wood?
-
20th January 2007, 05:08 AM #3
Might have been Imperial screw, but I can't figure which would be a close match. Whatever. As long as it works, perfect enough.
Tashammer, if you don't mind only black, you can transfer laser print to wood with a clothes iron. Just make sure SWMBO is absent for a while. A friend of mine gets unlimited grief when he washes car parts in the kitchen sink. See http://www.woodworkforums.ubeaut.com...ad.php?t=42895, post #12. Might work for inkjet in color, but I haven't tried it.
JoeOf course truth is stranger than fiction.
Fiction has to make sense. - Mark Twain
-
20th January 2007, 08:16 AM #4
Was 3/16" imperial thread.
-
20th January 2007, 12:59 PM #5Woodturner
- Join Date
- Jan 2006
- Location
- Lake Seminole, Georgia USA
- Age
- 79
- Posts
- 1,111
Maybe is a Whitworth thread.
http://www.boltscience.com/pages/screw4.htm
[or maybe British Standard Fine (BSF) or Cycle Engineers' Institute (CEI)]
-- Wood Listener--
-
20th January 2007, 11:50 PM #6
Wonderful thing about standards: There are so many to choose from.
JoeOf course truth is stranger than fiction.
Fiction has to make sense. - Mark Twain
-
21st January 2007, 01:00 PM #7
-
21st January 2007, 05:18 PM #8Hewer of wood
- Join Date
- Jan 2002
- Location
- Melbourne, Aus.
- Age
- 71
- Posts
- 12,746
Nice one Vern.
Got one of those whatsits and am getting sick of keeping that odd allen key handy.Cheers, Ern
-
21st January 2007, 11:15 PM #9
-
22nd January 2007, 08:51 AM #10
Try www.thewoodsmith.com.au He's into Sorby stuff. In Victoria but it wouldn't cost much to mail a couple of screws.
Jack the Lad.
Similar Threads
-
Is this the cheapest yet?
By Barrie Restall in forum HAND TOOLS - POWEREDReplies: 13Last Post: 31st August 2006, 11:23 PM -
Replacing tip in tailstock centre
By Tiger in forum WOODTURNING - GENERALReplies: 10Last Post: 25th May 2006, 10:24 PM -
sorby turning tools
By sbranden in forum WOODTURNING - GENERALReplies: 8Last Post: 18th April 2006, 03:25 AM -
Do you tip in restaurants?
By craigb in forum POLLSReplies: 38Last Post: 1st March 2006, 01:30 PM -
Winding Sticks - news from LV, plus my tip for the day
By derekcohen in forum HAND TOOLS - POWEREDReplies: 2Last Post: 10th December 2005, 11:25 PM