Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Spindle adapters wanted
-
21st August 2012, 10:07 PM #1Novice
- Join Date
- Aug 2012
- Location
- Melbourne VIC
- Posts
- 15
Spindle adapters wanted
Hello folks,
I have an old Tanner FS100 lathe that is a solid as a rock. It is fitted with an outboard spindle but I do not have the accessories to do outboard turning.
The spindle is 1-3/6" x 6 TPI LH and the inboard spindle is 1-1/2" x 6 R - cannot fathom why both spindles are not the same size.
Anyway, I need either:- a chuck that will fit the 1-3/8" 6 tpi, or
- an adapter to allow me to use my standard chuck.
Ken M
-
21st August 2012 10:07 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
21st August 2012, 10:47 PM #2
Give Vermec a call, they do pretty good work. I have a couple of their spindle adaptors, & one custom made to suit a specific application.
http://vermec.tripod.com/PDFs/SpindleAdaptorPage.pdf
Maybe they were different sizes to suit bearing design & replacement?Last edited by Mobyturns; 21st August 2012 at 10:50 PM. Reason: added note.
-
21st August 2012, 10:48 PM #3Deceased
- Join Date
- Jun 2003
- Location
- ...
- Posts
- 7,955
Vicmarc make an chuck insert for your size, so your favourite turning retailer , say Pops Shed, Carbatec or Carrolls, can get it in for you.
Peter.
Similar Threads
-
spindle shaft wanted
By robyn2839 in forum ROUTING FORUMReplies: 11Last Post: 4th January 2011, 06:21 PM -
5MT - 5C Collet adapters
By Gavin Newman in forum METALWORK FORUMReplies: 9Last Post: 3rd March 2010, 09:24 PM -
Shank adapters/sleeves - reusable or not?
By Bitslong in forum ROUTING FORUMReplies: 2Last Post: 13th August 2009, 09:03 PM -
Gas converter adapters
By DeltaNegative in forum METALWORK FORUMReplies: 4Last Post: 29th July 2009, 10:04 AM -
Scrolll Saw Blade Adapters
By oges in forum SCROLLERS FORUMReplies: 0Last Post: 30th June 2006, 07:57 PM