Needs Pictures: 0
Results 1 to 15 of 31
-
27th October 2022, 09:18 AM #1
where do we do our stuff? Put your workshop aka shed up here for all to see
Ok mine is jammed in between the house and the back fence . A small tin shed with no windows just a couple of sky lights, oh and some insulation to the roof and built a annex/leanto at the entrance, in there I have some storage and the the dust collector.
IMG_3278-horz.jpg
As we go though the door I have the bandsaw there, rolls of sand paper and the small lathe along with an old Wolf bench drill over 60 years and still going strong. Just recently changed the bearings in the old drill for the first time, blank storage behind the lathe curtain.
IMG_3288-horz.jpg
Second lathe and mobile bench with wooden leg vise and drawers at the end and a few things in progress
IMG_3292-horz.jpg
More storage blanks tools and the grinder, note tools hanging from the roof saves me wall space and there precious little of it left
IMG_3290-horz.jpgInspiration exists, but it has to find you working. — Pablo Picasso
-
27th October 2022 09:18 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
27th October 2022, 09:24 AM #2.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,792
Just shows what can be shoehorned into a small space.
The only thing that irks a bit is seeing a DC inside a shed.
-
27th October 2022, 10:53 AM #3SENIOR MEMBER
- Join Date
- May 2018
- Location
- Melbourne
- Posts
- 507
Nothing like a good Aladdin's cave
-
27th October 2022, 01:56 PM #4
The DC is in the annex I had place the shed in a fairly controlled spot due to various regulations. It really cant go anywhere else due neighbours/noise, close line and few other obstacles
So the shed is about 1.5m from one fence and 1m from the other. So the annex is 1.5 x 4.5m. The other that, theres a hanging atmosphere scrubber type DC, way too big for the location. But it was a freebee needed some work to get it going but now it works fine.Inspiration exists, but it has to find you working. — Pablo Picasso
-
30th October 2022, 10:42 PM #5GOLD MEMBER
- Join Date
- Jan 2013
- Location
- Tasmaniac
- Posts
- 1,470
I am really interested in this topic and hope many more folk particularly those in urban environments will post about their workshop set ups.
As someone who has had (and still does) a workshop in a rural area for the past 30+ years I can see the day creeping up where a more suburban workshop might be the go.
Not upsetting neighbors with noise and possibly dust must be one of the big deals in this respect.
-
31st October 2022, 08:59 AM #6
Sadly, the design of new subdivisions and homes, means smaller lots, tighter set-backs, higher site utilization with relatively large homes on those lots. An ageing population, in the established suburbs, also means more retirees looking to fill in their day, but also a significant change in demographics as retirees down size, which potentially may create conflicts.
It will become significantly more difficult to find the space to undertake any hobby / craft that requires machinery, and secondly "to keep the neighbours happy." A sad reflection that we become more stressed with less outlets to mitigate some of that stress.
My "shed" is a multi-use space with most of my equipment on castors, so the layout constantly changes depending upon what tasks I'm performing. The only things fixed are a work bench and storage racking. Way too much gear and materials for the space that I have.
The one thing I'm very conscious of is noise and dust annoyance to our neighbours, so I've replaced the thicknessser with a spiral head unit and will also replace the jointer (one day) which is used very infrequently, so not a high priority. I also tend to do the more noiser tasks at times when I know the neighbours are out.
We have a back neighbour who restores mostly V8 1950's to 1980's vehicles, so he tends to be noisier.Mobyturns
In An Instant Your Life CanChange Forever
-
31st October 2022, 09:19 AM #7I now have 3 sheds
- Join Date
- Aug 2010
- Location
- Soldiers Point, NSW
- Age
- 60
- Posts
- 185
I've been thinking that I need a bigger shed. What do you reckon?
2022b.jpg2022c.jpg2022a.jpg
Just to show that occasionally some work is actually done in there....
P1000383.jpg
Regards
Twosheds
PS Bluddy 3rd photo was taken in portrait mode and has rotated 90 degrees and I can't correct it.
-
31st October 2022, 12:01 PM #8GOLD MEMBER
- Join Date
- Jan 2013
- Location
- Tasmaniac
- Posts
- 1,470
-
31st October 2022, 01:33 PM #9
-
31st October 2022, 03:41 PM #10Senior Member
- Join Date
- Aug 2012
- Location
- Caringbah, NSW
- Age
- 81
- Posts
- 386
Having seen Hughie's work, and his workshop, just proves that very high quality work does not need a huge, elaborate or expensive workshop. His work is fantastic and would be a credit to anyone and is what one would expect from much larger and better equipped premises. I reckon he must be a cat lover - there is definitely no room to swing one!
As for me - I don't have a workshop or a shed. The lathe, bandsaw and grinder are out in the open under a tarpaulin. With neighbours real close, I don't work when their washing is out, and (being outside) don't work when it's raining. But I still have fun, and that's what's important. And the best bit is "who needs dust extraction?". A mask, and working during the regular southerly busters, take care of that .
Finally Hughie, best wishes on your move south of the Rat Race.
Cheers, Gary
-
31st October 2022, 07:06 PM #11
-
31st October 2022, 07:26 PM #12SENIOR MEMBER
- Join Date
- Oct 2009
- Location
- South Africa
- Posts
- 950
-
31st October 2022, 09:16 PM #13
-
31st October 2022, 09:25 PM #14GOLD MEMBER
- Join Date
- Jun 2005
- Location
- Townsville. Tropical Nth Qld.
- Posts
- 1,244
-
1st November 2022, 09:50 AM #15
rural life ahh gotta love it.
I start doing stuff in the shed...(not working, just stuffing around.
the neighbours one side his shed is about 100M away and he is (trying) to rebuild an E type Jaguar. I know when he is in there from the swearing and metal things being thrown around in anger and bouncing off the tin shed walls. Outside he is very pleasant and easy to live with.
Neighbour 2 has 3 sheds, one holds his collection (5) early Holdens. I know when he is working due to the noise from an exhaust free tractor he is working on. I use that term loosely, I think he enjoys the noise it makes. Mind you he is .5K away. Then on the weekends you hear all the 'workers' running around on their rideon mowers.I would love to grow my own food, but I can not find bacon seeds
Similar Threads
-
12m x 6m Colorbond Shed - Storage Shed to Workshop
By Junkie in forum THE SHEDReplies: 63Last Post: 12th May 2019, 07:52 PM -
Might be good, might be terrible - aldi workshop stuff coming up
By rtyuiop in forum WOODWORK - GENERALReplies: 37Last Post: 23rd June 2018, 10:29 AM -
Losing stuff in the shed
By MWF FEED in forum METALWORK FORUMReplies: 0Last Post: 25th May 2018, 10:20 AM -
Stuff for the shed
By Auld Bassoon in forum WOODWORK PICSReplies: 7Last Post: 3rd January 2007, 10:24 PM -
Workshop stuff
By Pat in forum WOODWORK - GENERALReplies: 0Last Post: 19th April 2005, 09:31 PM