Thread: Sun and Planet Mobile

DSC_0590 (800x533).jpgDSC_0592 (800x533).jpg

I thought I would post this for S & Gs on a Saturday night.

Our son asked me if I could make a sun and planet mobile like the one that he had seen on the internet. It was made of painted polystyrene and probably looked alright, but he thought Grandad could do it better for the grandkids by just turning a few balls out of wood. (It is just so easy to turn spheres/balls, isn’t it? You just remove the wood that does not look like a ball!)
I turned 13, I think, and rejected 2 of them because they were not spherical after I parted them off – funny how a shape can change after it comes off the lathe.

The big one, the sun, is Silky Oak and except for Saturn, the rest are Mango, Meranti, Sally Wattle, Ironbark, Jaca and I think Spotted Gum.
Saturn is laminated Marine Ply from the Bunnings tree, with a pine core. It is a little known fact that Saturn is a bit flat at the “North” Pole. I only found this out when Saturn decided to try to orbit around the shed as I was trimming the “South” Pole. Some of the Marine Ply delaminated – something I should have thought of but didn’t. All good while it was supported by the tail stock, but the load was too great for it a few laminates in from the sacrificial bit at the chuck.

Finished with WOP gloss.

I only hung it roughly here to see how it would look, as it has to go to Brisbane for the final hanging. So the string is a bit untidy and the lengths might be adjusted in the final hang. I had to reinstate Pluto to fill a gap and get the balance right.

The armature is 6x6 mm square ally rod.

(Edited - wrong pictures)

Cheers,
Alister.