Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
Thread: Support posts for rocking horse.
-
11th November 2009, 10:22 AM #1Member
- Join Date
- Sep 2006
- Location
- Berkshire, England
- Age
- 95
- Posts
- 72
Support posts for rocking horse.
Hello my Aussie chums, been missing for a time but back in the fold and twice as fit.
I have a friend who is making a wooden rocking horse for his grandson. He's a highly qualified engineer with acces to big lathes, surface grinders, mills and so forth but can't turn wood to save his life! Of course the metal work is easy peasy for him.
As you might expect.
He's asked me to make two columns, with ornamental turning, nothing elaborate just some curved bits to pretty it up. It needs to be about 3" square to start with but anyone suggest what would be more suitable woods to use.
Ho[pe all is welll down under.
docuskIf I had a pound for every clever and successful Idea I have had over the years --- I'd still be broke!
On the other hand.....
-
11th November 2009 10:22 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
11th November 2009, 10:56 AM #2
I'd recommend pine.
It turns well, looks fine (especially if stained), finishes ok and 3" square sections are easy to come by and are economical. And it's sturdy enough.
Here is a pic of a horse I made, though I did not do the turning of the posts.
Cheers,
Dave...but together with the coffee civility flowed back into him
Patrick O'Brian, Treason's Harbour
-
11th November 2009, 11:01 AM #3
Sorry - I should have said at the top of the last post that whatever timber the rest of the horse is made out of would look great. i don't think it will be particularly important.
Also didn't notice you were in england, whose wood species are beyond my experience.
Cheers,
Dave...but together with the coffee civility flowed back into him
Patrick O'Brian, Treason's Harbour
-
11th November 2009, 11:09 AM #4
I have 2, one is Jarrah and the other one is Tallowwood. I would recommend Jarrah. It is easy to work with, beautiful and very stable.
Visit my website at www.myFineWoodWork.com
-
11th November 2009, 11:14 AM #5
-
11th November 2009, 11:20 AM #6
-
11th November 2009, 12:09 PM #7
Great looking horsie Dave.
Richard in Wimberley
-
11th November 2009, 12:15 PM #8
Thanks! It's not in the league of Wongo's (he'll concur, I think ). Was made at a 3 day carving course - all joinery was done beforehand.
I'm very happy with the horse, and enjoyed the course. My daughters both love it, and there is always some kid on it when people come over, and that's really the whole point of it.
If I was going to do another it would probably be for a grandchild (my daughter is only 5, so I have a little time up my sleeve ). It would also be hand carved all the way with Anthony Dew bits on it. but that's probably for another time and another thread
Cheers,
Dave
PS. Sorry for the slight hijack, docusk...but together with the coffee civility flowed back into him
Patrick O'Brian, Treason's Harbour
Similar Threads
-
not rocking horse
By brontehls in forum TOY MAKINGReplies: 12Last Post: 27th May 2009, 06:51 PM -
rocking horse
By channa in forum WOODWORK PICSReplies: 13Last Post: 16th December 2006, 07:32 AM -
Rocking Horse
By MICKYG in forum WOODWORK - GENERALReplies: 2Last Post: 8th February 2006, 10:16 PM -
Rocking Horse
By Chesand in forum WOODWORK PICSReplies: 7Last Post: 8th January 2006, 11:17 PM -
Rocking horse
By kiwik in forum WOODWORK PICSReplies: 10Last Post: 14th June 2005, 12:58 AM