Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Teknatool lathe tl-1200
-
22nd September 2021, 08:25 AM #1Novice
- Join Date
- Mar 2015
- Location
- Boonah Qld
- Posts
- 18
Teknatool lathe tl-1200
Does the Live Centre on the Tailstock "knock-out" as on other lathes. This lathe has not been used for a long time. Is there a Morse Taper within the Tailstock? Maybe it is seized?
-
22nd September 2021 08:25 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
22nd September 2021, 11:10 AM #2
Confusingly, there were two 'versions' of the TL-1200. One with a single square beam rail (I had one of those) and one with a pair of round rails with swivel head. Both good lathes for their time.
The manual for the single square rail is much the same for the TL1000
NOVA TL-1000 Lathe : Teknatool International
Here is the manual for the swivel head version, which is much the same as the TL1500
NOVA TL-1500 Lathe : Teknatool International
Anyway, both had M2 tapers in head and tailstock.Stay sharp and stay safe!
Neil
-
22nd September 2021, 01:58 PM #3Novice
- Join Date
- Mar 2015
- Location
- Boonah Qld
- Posts
- 18
Thank you Bowl Turner, I appreciate your help.
-
22nd September 2021, 07:00 PM #4
Does it eject using the handwheel or do you need to knock it out with a knockout bar?
Dallas
-
23rd September 2021, 01:06 PM #5Novice
- Join Date
- Mar 2015
- Location
- Boonah Qld
- Posts
- 18
Knock-out Bar required to remove M2 from Tailstock, on this lathe.
Similar Threads
-
Centauro TM 1200 Lathe Info or Manual Request
By Quasimodo in forum WOODTURNING - GENERALReplies: 2Last Post: 19th September 2013, 11:57 AM -
Teknatool Nova TL 1200
By kiwioutdoors in forum WOODTURNING - GENERALReplies: 6Last Post: 1st August 2009, 08:26 PM -
Teknatool Lathe
By Hamish in forum WOODTURNING - GENERALReplies: 2Last Post: 12th December 2004, 09:59 PM