Thread: Teknatool Nova Comet II Midi Lathe Web special

https://www.woodworkforums.com/f8/its-here-151535/

I have a feeling I wont be getting one
I cant see this review and a Google search has yielded only a Youtube sales vido from a US WW show

I cant even get the Teknatool website up to see the sales info

The review in the other thread is a pdf file so you will need Adobe Acrobat reader to view it.

I had no trouble getting to the Teknatool site page for the Comet lathe

NOVA Comet II Midi Lathe

There is alink there to downloaad/view the product brochre as well.

Software is not my problem, I have tried 3 different browsers and still cannot open the site or the document
It has been years since I have not been able to access a site like this
I guess I wont be buying one after all

I also find the link is not good. It reverts me back to the title page.


Teknatool Nova Comet II Midi Lathe : CARBA-TEC


got my info from here

Here is the brochure downloaded from the Teknatool site in my link above.

I recently bought one of these lathes, like anything there are good and bad points.
For what it was designed for it works well. If you want to turn mainly harder woods over say 150mm then get a bigger lathe. It will work but for larger sizes 3/4 hp motor is not powerful enough. It will work ok but you have to go slow. For mainly smaller diameters it is great.
I found the speed sticker around the electronic speed knob to be accurate but the knob was not put on aligned with the sticker. This was easily fixed and I contacted Teknatool who replied quickly and they have contacted the factory. Good backup.
I like the reverse feature, it really does help with sanding
Not sure why they chose a motor with brushes rather than brushless, maybe it makes the speed control cheaper. You are getting a pretty good lathe for the price.
Apart from wishing the motor had another half hp, I find it hard to fault.
I am only a beginer turner, please keep that in mind.
Don

The Comets should be a competent lathe for their capacity. I've used its smaller sibling the Mercury (1/2hp) for something like 8 or 9 years now. It has been an excelent lathe but eventually the VS unit died approx 18 months back. Unlike the poster above Teknatool were not very helpfull at all in assisting with sourcing parts because the Mercury now discontinued. It now sports a modified VS unit of another brand.

For those in the US.... Amazon $415 and free shipping. Introductory Offer with the free attachment base for outboard.
[ame=http://www.amazon.com/NOVA-46000LO-Limited-Edition-Launch/dp/B007JSSJAE/ref=sr_1_3?ie=UTF8&qid=1345566687&sr=8-3&keywords=nova+comet+lathe]Amazon.com: NOVA 46000LO Comet II Midi Lathe with Limited Edition Launch Offer: Home Improvement[/ame]