Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 14 of 14
-
13th June 2006, 09:21 PM #1You've got to risk it to get the biscuit
- Join Date
- Jan 2006
- Location
- Canberra
- Age
- 32
- Posts
- 4,195
my third bowl, i'm getting better at sanding these stoopid things
hi all....
after an hour and a half, i finished my 3rd bowl.
the wood is silky oak and i finished it with shellawax.
i used some of the techniques for sanding mentioned in my previous thread ( my second bowl) and they greatly improved my sanding time and finish.
the base is very wide because it was done on the faceplate because i haven't got a scroll chuck as yet.
the edge of the pool table and the balls should give you a fair idea of the size.S T I R L O
-
13th June 2006 09:21 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
13th June 2006, 09:50 PM #2
You're definitly getting there, Stirlo.
Try not to go too fast on the sanding. Don't think of it so much as a chore but an important part of the process. The finish can make or break a bowl in terms of appearance.
I really like your use of the pool table in the photos too. The viewer can really appreciate the size of the bowl. Well done.
Here is some Silky Oak I did earlier this year, the grain is almost three dimensional when you look at it in the flesh. It's also smooth as, well, silk
edit: Got a better pic of the three dimensional grain, didn't mean to detract from the quality work you are doing.
-
13th June 2006, 10:04 PM #3
Now thats what i call a vast improvement. Now all you need is the Vicmarc 120 and some bigger wood Keep up the good work, Regards......Joash
P.S A pic of a natural edged camphor bowl, also a large jarrah burl platter.--enjoy
-
13th June 2006, 10:08 PM #4You've got to risk it to get the biscuit
- Join Date
- Jan 2006
- Location
- Canberra
- Age
- 32
- Posts
- 4,195
Originally Posted by Auzzie turner
now bigger wood is a good idea
nice bowls btw.
some brilliant grain in that piece toasty....S T I R L O
-
14th June 2006, 01:00 AM #5
Hi Stirlo - if you only have a faceplate and want to have a smaller base to your bowl then you could try gluing a piece of waste/scrap wood to your blank - Attach the waste wood to your faceplate - this will allow you to make a very small base to a bowl if you want. You can turn the bowl down to the base width you want then, part off from there and hand sand the bottom.
Hope that makes sense (I know what I mean anyway ).Cheers,
Andy
"There's more wisdom gained in listening than in speaking"
-
14th June 2006, 01:39 AM #6Woodturner
- Join Date
- Jan 2006
- Location
- Lake Seminole, Georgia USA
- Age
- 79
- Posts
- 1,111
Fine work on the Silky Oak bowl, Stirlo!!
-- Wood Listener--
-
14th June 2006, 09:19 AM #7
Stirlo, Great effort on the bowl and a big improvement on the finish. Now you've just got to work on the base/shape. Go with Cavemans tip mate! There were a hell of a lot of bowls being turned long before scroll-chucks came along. Gluing on to pieces of waste is something I still do now if I don't want to waste part of a special bit of wood - a spigot or recess for the scroll chuck means wasting 5 or 10mm of everything you turn. If your not sure of the steps to take, PM me and I'll come up with some pics for you.
-
14th June 2006, 04:45 PM #8You've got to risk it to get the biscuit
- Join Date
- Jan 2006
- Location
- Canberra
- Age
- 32
- Posts
- 4,195
thanx guys.
i know what you mean andy and i'm gunna try it next time....
how would it go if you turn a base and then jam it into a piece of scrap? is it as safe as andy's way.
ttit, i'll try it first and if it doesn't work i'll get ya to get some piccies, ( you can have a greenie for the thought)S T I R L O
-
14th June 2006, 05:08 PM #9
Hey stirlo
As you know, I'm no turner, but post #8 on this thread
http://www.woodworkforums.ubeaut.com...ad.php?t=33080
shows you what I think the caveman was suggesting. I would have thought it would be easier to do it in one step like that than to do it in two steps, but hell I's still trying to learn to do dovies,....
JeremyCheers
Jeremy
If it were done when 'tis done, then 'twere well it were done quickly
-
14th June 2006, 05:24 PM #10You've got to risk it to get the biscuit
- Join Date
- Jan 2006
- Location
- Canberra
- Age
- 32
- Posts
- 4,195
it looks similar to what i was thinking
S T I R L O
-
14th June 2006, 10:37 PM #11
Stirlo,
Good to see that you are learning as you go and fixing the mistakes of your last go.
Read up on jam chucks. Could be just the ticket.
DanIs there anything easier done than said?- Stacky. The bottom pub, Cobram.
-
15th June 2006, 10:21 PM #12You've got to risk it to get the biscuit
- Join Date
- Jan 2006
- Location
- Canberra
- Age
- 32
- Posts
- 4,195
dan, thanx for the greenie and encouragement.
i was thinking jam chucks but i want to try that with an experienced turner first so peices dont go flying off and smashing things.S T I R L O
-
16th June 2006, 01:33 AM #13
Stirlo, the secret to jam chucks is bringing up the tailstock. That way, even if the chuck's a bit sloppy things shouldn't go whizz-banging around the shed. Anyone who doesn't use the tailstock (even "grand-poobah turners") is risking trouble... the only time it should be moved out of the way is for that last li'l smidgin in the middle.
Still, good on ya for playing safe. I oughtta get you 'round here to talk to my "apprentice."
- Andy Mc
-
16th June 2006, 04:39 PM #14You've got to risk it to get the biscuit
- Join Date
- Jan 2006
- Location
- Canberra
- Age
- 32
- Posts
- 4,195
Originally Posted by Skew ChiDAMN!!S T I R L O
Similar Threads
-
my second bowl
By ss_11000 in forum WOODTURNING - GENERALReplies: 22Last Post: 15th June 2006, 10:33 PM -
Hot air gun drying bowl for sanding.
By ribot in forum WOODTURNING - GENERALReplies: 9Last Post: 12th April 2006, 10:00 AM -
First Big Bowl Off The New Nova
By Dick in forum WOODTURNING - GENERALReplies: 12Last Post: 3rd March 2006, 02:46 PM -
Gmelina Natural Edge Bowl
By Little Festo in forum WOODWORK PICSReplies: 16Last Post: 4th August 2005, 10:15 AM -
Oops, I'm a sugar bowl...
By jhunt_2000 in forum WOODWORK PICSReplies: 5Last Post: 17th December 2003, 03:20 PM