Needs Pictures: 0
Results 1 to 15 of 20
-
17th February 2020, 04:26 PM #1
Best Timber for Turning Tool Handles
Hi Everyone
I haven't been on the forum for a while, but picked up a couple of new to me H&F lathes (WL-14V and WL-20) yesterday. I would like to make some new handles for my turning tools. What is the best type of timber to use, please?
Cheers
BeaverLight travels faster than sound.......This is why some people appear bright, until you hear them speak.
-
17th February 2020 04:26 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
17th February 2020, 09:32 PM #2
The answer is "It Depends"
It depends on what you have on hand, is it weight or looks, heavy duty or finesse.
Spotted Gum is a good balance for weight and heavy duty, having weight and flexibility. Some of the harder timbers are too brittle for use.
Most Pines are only good for practice centring and getting the shape right for you.
What ever you decide, make sure it is straight grained and clear of defects along the entire length.
Burls and interesting grains look pretty, but a decent catch may make the handle fail in your hands, not for the faint hearted.Pat
Work is a necessary evil to be avoided. Mark Twain
-
17th February 2020, 10:29 PM #3GOLD MEMBER
- Join Date
- Oct 2018
- Location
- Dandenong Ranges
- Posts
- 1,893
Hi Beaver. I agree with Pat. It turns nicely, sands well and takes oil based finishes. I had some 90 x 45 lengths left over after a job and they ripped almost square. Some of the handles ended up a bit thin, and I would make them a bit longer now but I learnt a lot. Also Spotted Gum is what shovel handles are made of.
-
18th February 2020, 12:00 AM #4GOLD MEMBER
- Join Date
- Jun 2005
- Location
- Townsville. Tropical Nth Qld.
- Posts
- 1,244
Beaver, I use the free local timber, Chinee Apple. I have been using it since 1988, never had a failure.
Rgds,
Crocy.
-
18th February 2020, 12:33 AM #5China
- Join Date
- Dec 2005
- Location
- South Australia
- Posts
- 4,475
I have made turning chisel handles from Australia Oak, Tasmanian Blackwood, Spotted Gum, Oregon, Olive ( a bit heavy) Peach and pretty much any thing else that was within reach at the time
-
18th February 2020, 01:57 AM #6
I have used Marri, Jarrah and Sheoak but then I'm in W.A.
It seems that what ever is in the rack is the right stuff
Rick
-
18th February 2020, 09:30 AM #7
Thanks All for the replies and advice. I have some Spotted Gum on hand that I can use.
Thanks again for sharing your knowledge.
Cheers
BeaverLight travels faster than sound.......This is why some people appear bright, until you hear them speak.
-
20th February 2020, 04:06 AM #8GOLD MEMBER
- Join Date
- Sep 2008
- Location
- North Carolina, USA
- Posts
- 2,327
I like heavy & dense to absorb vibration. I also split logs into quarters as that gives straight grain, as opposed to sawing. I have big hands and make bowls, so use bigger gouges with nice fat handles.
So much timber, so little time.
Paul
-
27th February 2020, 01:29 AM #9SENIOR MEMBER
- Join Date
- Aug 2017
- Location
- Canberra
- Posts
- 587
yeah heavy and a bit of length......far better then short ant light
-
27th February 2020, 07:58 AM #10Senior Member
- Join Date
- Aug 2014
- Location
- Geelong, Victoria
- Posts
- 284
I maybe less choosy than some but I have turned a lot of handles from a batch of pallet skids that I suspect are merbau. There are a few flaws, but also some nice grain, but I have had zero problems. But then I see all sorts of handles as utility rather than show pieces. I also usually finish with 50:50 BLO terps mix and a final buff with beeswax (from my own bees).
-
27th February 2020, 09:07 AM #11
-
27th February 2020, 08:53 PM #12
That may ensure that the grain is aligned to the axis of the tool handle, however wood that splits easily is not ideal for turning tool handles. The interlocked grain in woods such as spotted gum is more preferable for high stress tool handles. The tool handle ferrule is also an important feature that prevents tool handle failure around the tool steel tang.
Mobyturns
In An Instant Your Life CanChange Forever
-
28th February 2020, 09:28 AM #13
Hi Moby
Thanks for your reply, coincidentally we live in the same city.
I was planning to make some copper ferrules from some larger OD pipe from the big green shed. Would that work, or do I need some thicker walled material for the ferrules?
Cheers
BeaverLight travels faster than sound.......This is why some people appear bright, until you hear them speak.
-
28th February 2020, 10:13 AM #14
Copper Capillary Fittings make good tool ferrules and are much stronger than the supposedly "brass" ferrules on offer from some sources. They are easy to cut in half and to tidy up on a wood lathe to true up the cut edgs and to arris the corner. Its becoming difficult to find quality tool ferrules as most of the "brass" has a coarse grain structure and cracks quite easily IF the ferrule is "punched" to help retain it on the handle.
Mobyturns
In An Instant Your Life CanChange Forever
-
28th February 2020, 09:16 PM #15
I have been using radiata pine for handles now for a long time, with 19mm hard drawn copper ferules. Haven't managed to break a handle yet after 40 odd years of turning. The copper is from off cuts from one of the local plumbers. If a heavy handle is needed to counter vibration, something is radically wrong. I have turned plenty of Cooktown hardwood and still haven't needed to use hardwood for handles.
JimSometimes in the daily challenges that life gives us, we miss what is really important...
Similar Threads
-
Tool handles and offset turning
By Willy Nelson in forum WOODTURNING - GENERALReplies: 10Last Post: 5th August 2019, 06:48 AM -
Turning turning tool handles
By ozhunter in forum WOODTURNING - GENERALReplies: 13Last Post: 27th July 2012, 04:11 AM -
Turning Cutlery Handles
By ianmcdougall in forum WOODTURNING - GENERALReplies: 5Last Post: 26th December 2006, 10:29 PM -
Choice of timber for tool handles
By rsser in forum WOODTURNING - GENERALReplies: 34Last Post: 8th December 2006, 11:42 AM