Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 30
Thread: tool rest
-
9th April 2010, 06:25 PM #1GOLD MEMBER
- Join Date
- Sep 2008
- Location
- texas, queensland
- Posts
- 1,239
tool rest
one of these days i am going to have to make a tool rest for outboard turning ( been saying that for over 30 years ) but for now this is working , bit of a pain when the rest needs to be moved , need 3 hands to undo the G clamps reposition the rest and clamp it up again .
'If the enemy is in range, so are you.'
-
9th April 2010 06:25 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
9th April 2010, 06:34 PM #2Hewer of wood
- Join Date
- Jan 2002
- Location
- Melbourne, Aus.
- Age
- 71
- Posts
- 12,746
Where's the fencing wire? ;-}
And the can of Coke is to demonstrate that there's no flex or vibration?Cheers, Ern
-
9th April 2010, 06:35 PM #3Senior Member
- Join Date
- Dec 2008
- Location
- Tasmania
- Posts
- 430
Outboard Turning Tool Rest
Hi Texx,
I hope you haven't been turning radiata Pine for the last thirty years. There's no one but no one who deserves that sort of punishment!! .
Old Pete
-
9th April 2010, 06:46 PM #4GOLD MEMBER
- Join Date
- Sep 2008
- Location
- texas, queensland
- Posts
- 1,239
radiata i hate the stuff ,but for this project on a budget its about all i could use .its a hat stand and that is the base in the lathe and not going very well at all didnt join up very well (select grade my eye ).
would like to use better timber but availability out here is limited to say the least ,thought of using ironbark but if it fell on some one it would kill them .'If the enemy is in range, so are you.'
-
9th April 2010, 09:57 PM #5Retired
- Join Date
- May 1999
- Location
- Tooradin,Victoria,Australia
- Age
- 73
- Posts
- 11,918
The poor old Radiata cops it in the neck again.
A tree has:
Bark
Leaves
Trunk
Branches
Roots
Sucks up water
Expels Carbon Dioxide.Inhales carbon dioxide and expels oxygen.
HMMMM a Radiata does all this ergo it must be a tree.
It works well, easy on tools, is plantation grown, sustainable, holds good detail, finishes well and as far as I know, non allergen.
A lot of people have educated their kids, kept up their mortgage payments and put food on the table because of Radiata pine. I am one of them.
It is nice to work the exotics (done that too) but value for money and availability you can't equal the humble pine.
Don't be a timber snob.
-
9th April 2010, 10:02 PM #6.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,792
-
9th April 2010, 10:21 PM #7
I agree with you . Much of the every day furniture I have made is radiata pine. It is easy to work, machines well and is untreared.
JimSometimes in the daily challenges that life gives us, we miss what is really important...
-
9th April 2010, 10:37 PM #8GOLD MEMBER
- Join Date
- Sep 2008
- Location
- texas, queensland
- Posts
- 1,239
i like the price of it compared to other timber , i like the feature in the grain ,and the colour.
i dont like the softness to easy to dent , and i dont like the end grain tear out .
i learnt to turn with it in strathpine brisbane in the mid 70's all our practice stuff was done with it , every thing we made was radiata pine , maybe i got sick of it .'If the enemy is in range, so are you.'
-
9th April 2010, 11:29 PM #9
I like the tool rest solution. Maybe I CAN do outboard turning on mine. Will have to learn backwards turning cos I haven't got a reversing motor though.
anne-maria.
Tea Lady
(White with none)
Follow my little workshop/gallery on facebook. things of clay and wood.
-
9th April 2010, 11:54 PM #10
-
10th April 2010, 12:27 AM #11Retired
- Join Date
- May 1999
- Location
- Tooradin,Victoria,Australia
- Age
- 73
- Posts
- 11,918
-
10th April 2010, 02:58 PM #12
Nice bowl Joe. Apparently radiator pine is held in same high esteem as most U.S. pines. Gone to look for a picture. Back in a minute.
Found some pine stuff. This is ordinary kiln dried southern yellow pine (SYP) construction lumber.
Oops, not on topic re. outboard tool rest. Sorry about that.Richard in Wimberley
-
10th April 2010, 03:18 PM #13Banned
- Join Date
- Jun 2007
- Location
- Otautahi , Te Wa'hi Pounamu ( The Mainland) , NZ
- Age
- 69
- Posts
- 2,114
If you don't have the skills to turn Radiata Pine , don't touch it .
-
10th April 2010, 03:23 PM #14Hewer of wood
- Join Date
- Jan 2002
- Location
- Melbourne, Aus.
- Age
- 71
- Posts
- 12,746
Seems there are grades of Radiata, like anything else.
A block of the stuff left behind by after a turnfest here was a much better turning proposition than other stuff I've tried.
Yeah, I'm a wood snob and proud of it. But this isn't the first time I've had to make a meal of my wordsCheers, Ern
-
10th April 2010, 03:42 PM #15GOLD MEMBER
- Join Date
- Sep 2008
- Location
- texas, queensland
- Posts
- 1,239
and if you live out my way dont turn your back on it or the white ants will have it gone quicker than you can say baygon.
they even ate the original old 1"plywood base board off one of my darkroom enlargers while i wasnt looking ,'If the enemy is in range, so are you.'
Similar Threads
-
tool rest
By thefixer in forum WOODTURNING - GENERALReplies: 13Last Post: 3rd May 2007, 08:03 AM -
Tool Rest?
By Bruce101 in forum WOODTURNING - GENERALReplies: 12Last Post: 5th August 2006, 06:20 PM -
tool rest
By ss_11000 in forum WOODTURNING - GENERALReplies: 8Last Post: 1st March 2006, 07:28 AM -
right angle tool rest
By hughie in forum WOODTURNING - GENERALReplies: 0Last Post: 22nd November 2005, 10:23 AM -
MC900 Tool rest
By smidsy in forum WOODTURNING - GENERALReplies: 9Last Post: 18th July 2004, 07:22 PM