Results 1 to 12 of 12
  1. #1
    Join Date
    Jan 2013
    Location
    Tasmaniac
    Posts
    1,469

    Default Turning treated pine

    Have got a finial to make to replace a rotten one.
    Client was happy to supply the timber.
    Was a bit surprised when he dropped off a 4 x 4 of treated pine.
    No doubt it will turn ok as it is radiata pine however I was just wondering if it was a wise move to actually turn the stuff considering the chemicals that are in it.
    Obviously a dust mask would be a must for a start.
    Anyone else turned treated pine without any major issues. Skin reactions etc.
    Cheers.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Mar 2008
    Location
    Hobart, Tas
    Posts
    1,211

    Default

    I'd be interested in hearing the response. I was practising making some boxes a while ago, and looking for some scrap, ended up using some left over treated pine fencing boards. With most of the work done with hand tools, the box and my hands stank terribly for days. So while I've vowed never to work with the stuff again for fine woodworking, it was only due to a gut feeling that stinky chemicals being released like that can't be great for me.

    Keen to hear some factual input however.

  4. #3
    Join Date
    Apr 2011
    Location
    McBride BC Canada
    Posts
    3,543

    Default

    Treated lumber is for weather-proof construction, not furniture.
    We never consider it for any other application. You just don't do that.

    A dust mask is no good = your bigger concern should be the spray of preservative in your eyes.
    Not In My Back Yard. Whatever floats your boat, the tide will do them all.

  5. #4
    Join Date
    Apr 2018
    Location
    Nsw
    Age
    64
    Posts
    1,351

    Default

    There are the usual health concerns with the treated pine but to keep it in perspective tradesman are working it all the time drilling, sanding , planing etc

  6. #5
    Join Date
    Nov 2006
    Location
    Cedarton
    Posts
    4,905

    Default

    Quote Originally Posted by Beardy View Post
    but to keep it in perspective tradesman are working it all the time drilling, sanding , planing etc
    Still doesn't make it safe Beardy ...they may well be poisoning themselves inadvertently!
    Best to turn something else AB, that hasn't been treated with the 'nasties'...MM
    Mapleman

  7. #6
    Join Date
    Jan 2013
    Location
    Tasmaniac
    Posts
    1,469

    Default

    I did an advanced search on this forum and the question had been asked 18 years ago.
    Here is a reply by (Retired) to a similar question asked back then.
    Quote...

    22nd Aug 2000, 07:42 PM #4

    RETIRED
    Retired


    Join DateMay 1999LocationTooradin,Victoria,AustraliaAge68Posts11,919Post Thanks / Like





    Gooday.

    Many years ago when we started turning this type of post we approached the CSIRO and a number of treatment works about the toxicity of treated pine posts or any others for that matter.

    This is a precis of their reply.

    A horse would have to eat 2 complete 1.2mx150mm posts every day for 21 years to die from the effects.

    A human would have to eat 2 complete 1.2mx150mm posts for 18 years to die.

    I have eaten a number of strange things but I ain't in the mood to sit and eat 2 posts.

    ------------------
    Ian () Robertson
    "We do good turns every day"

    End quote.
    Strangely enough I live in a rural area and have often noticed various horses nibbling away at the tops of treated pine posts. Can't say I have seen any of them eat the whole post though.
    Went ahead and turned the finial this morning.
    The original one to be replaced had been eaten in parts by ants according to the client. The timber looked to be oregon.
    DSCF7003.jpg This was from a house built in 1998. Looks like it has never been re-painted either. Finial was approx a metre long and 70mm x 70mm square. The treated 4 x 4 inch bit the client bought round was just a bit that he'd had in his shed for years, it had a some dodgy pith along one of the corners and was warped so I machined it down to 80mm square as the client did not mind if the final piece was going to be a bit chunkier.
    The treated pine turned ok and only gave it a light sand with 120 grit paper as it was getting painted.
    Only eyeballed the shape roughly when making, did not seem to warrant any pencil gauge or anything fancy like that.
    DSCF7004.jpg
    Did not turn right through on the ends
    DSCF7007.jpg
    Instead sawed the off cut off, chiselled the nub off, then a quick sand. Which I assume is normal practice.

  8. #7
    Join Date
    Apr 2018
    Location
    Nsw
    Age
    64
    Posts
    1,351

    Default

    Quote Originally Posted by MAPLEMAN View Post
    Still doesn't make it safe Beardy ...they may well be poisoning themselves inadvertently!
    Best to turn something else AB, that hasn't been treated with the 'nasties'...MM
    I wasn’t saying it necessarily was, just trying to keep some perspective on the matter
    Lots of products we use are not safe or of equal concern to TP so make your decision on what to do based
    on that

    Years ago we were doing some renovation work in a high rise office building in Sydney and had an air quality monitor in place as there was asbestos in the building. If the monitor rose above a certain level it was deemed unsafe and we had to stop work
    I took the monitor down onto George street at lunchtime and the meter went off the dial

  9. #8
    Join Date
    Nov 2007
    Location
    Albury Well Just Outside
    Posts
    13,315

    Default

    It's look a tad bigger than the original , but other than that excellent.

  10. #9
    Join Date
    Jan 2013
    Location
    Tasmaniac
    Posts
    1,469

    Default

    Quote Originally Posted by Christos View Post
    It's look a tad bigger than the original , but other than that excellent.
    It is a tad bigger in diameter. Client was not concerned about that. The finial is 3 stories up and there are no other ones in view to compare it to.

  11. #10
    Join Date
    Nov 2007
    Location
    Albury Well Just Outside
    Posts
    13,315

    Default

    Oh one of those is it. And the little buggers(termites) traveled three stories up to eat it. Is the rest of the house still intact?

  12. #11
    Join Date
    Jan 2013
    Location
    Tasmaniac
    Posts
    1,469

    Default

    Quote Originally Posted by Christos View Post
    Oh one of those is it. And the little buggers(termites) traveled three stories up to eat it. Is the rest of the house still intact?
    Well we are not supposed to have termites here in Tassie, mind you I have seen lots of things in firewood that look like them. Maybe they are white ants?. I don't know. Either way there does not seem to be the sort of termite that eats dry wood here as the notorious ones they have in Queensland for instance.. Owner suggested they were more like your little black ant type creatures. I was wondering if perhaps a cockatoo or some such bird had been chewing on the original finial as the ball on the top of it had been attacked by something other than ants as well.

  13. #12
    Join Date
    Oct 2018
    Location
    Dandenong Ranges
    Posts
    1,848

    Default

    If the finial was Oregon then I'm not surprised it has rotted. This species is not suitable for outside use

Similar Threads

  1. H3 H4 Treated pine
    By Arch Stanton in forum TIMBER
    Replies: 21
    Last Post: 14th November 2009, 07:44 PM
  2. Treated Pine
    By trenyboy in forum TIMBER
    Replies: 3
    Last Post: 4th May 2006, 03:36 PM
  3. Treated Pine
    By silentC in forum HAVE YOUR SAY
    Replies: 6
    Last Post: 20th March 2005, 08:22 PM
  4. Treated Pine Uses
    By abungate in forum TIMBER
    Replies: 2
    Last Post: 7th March 2002, 06:38 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •