Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
-
7th May 2012, 11:27 PM #1
Vicmarc bowl gouges and bowl gouge help
Hey all after youturn It has opened my eyes up
1 my cheap Hss bowl gouges are not upto it
2 I'm looking in to doing more burls
3 I'm looking at a all round good size I,e I'm likeing 12mm
I have a Thompson spindle gouge and love it
I'm thinking of getting
A Vicmarc bowl gouge as there M11 steel that I think it's the same as Thompson
Anyone tryed the Vicmarc ones?DANGER!!!!I'm Dyslexic Spelling may offend!!!!!
-
7th May 2012 11:27 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
7th May 2012, 11:39 PM #2Retired
- Join Date
- May 1999
- Location
- Tooradin,Victoria,Australia
- Age
- 73
- Posts
- 11,918
Yep, don't like their handles.
A 3/8 (1/2") shaft size is a good all round size.
-
7th May 2012, 11:48 PM #3
1/2" is a good size, I had a Hamlet and found it excellent, unfortunately I sold all my gear several years ago,.
I have since started to rebuild the workshop, and am using P&N, .
Sorby tools are also of the highest quality, I have to admit I have not used Vicmark tools .
Jeff
-
11th May 2012, 05:30 PM #4SENIOR MEMBER
- Join Date
- Jul 2001
- Location
- South Australia
- Posts
- 650
I ordered a 3/8 Bowl Gouge and a short quick release handle.
Love the shape and feel of the plastic handle.
Hate the length of the short?? handle nearly 400mm long with the reduction bush.
Love the way the gouge cuts, equally as good as my 3/8 original Glasser.
Hate The fact that I have to purchase a $15 reduction bush for each tool I want to use in the handle, or undo the grub screws with an Allen Key. This of course nullifies the idea of quick release and you may as well buy a standard handle.
I currently use this 3/8 Vicmarc gouge in a Woodcut QR handle which uses ISO Metric collets. This is a much better design as you can vary the tool length extension and store the tool reversed in the handle for transport.
Sorry Vicmarc, this QR handle misses the mark.
That's been my experience
Cheers
TimSome days I turns thisaway, somedays I turns thataway and other days I don't give a stuff so I don't turn at all.
Similar Threads
-
V Flute Profiles on P&N, Thompson, D-way and Ellsworth Bowl Gouges
By NeilS in forum WOODTURNING - GENERALReplies: 25Last Post: 15th February 2012, 12:03 PM -
Spindle roughing gouges on bowl work
By jefferson in forum WOODTURNING - GENERALReplies: 100Last Post: 4th January 2012, 08:58 PM -
The bowl gouge
By Nai84 in forum WOODTURNING - GENERALReplies: 38Last Post: 2nd September 2010, 09:34 PM -
Bowl Gouge
By gfeni in forum WOODTURNING - GENERALReplies: 8Last Post: 23rd November 2008, 12:28 AM -
Bowl Gouge
By antman in forum WOODTURNING - GENERALReplies: 5Last Post: 13th June 2004, 02:15 AM